AutoCodesNissan – P0130 Nissan

P0130 Nissan Code - Air Fuel Ratio Circuit Bank 1 Sensor 1

Quick Answer

The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. Common causes include Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1, Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted, Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0130 Nissan indicates Air Fuel Ratio Circuit Bank 1 Sensor 1.
Common causes
Common causes include Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1, Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted, Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 24,630
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 26, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0130 Nissan Description

The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. The sensor element of the A/F sensor is the combination of a Nernst concentration cell (sensor cell) with an oxygen-pump cell, which transports ions. It has a heater in the element.
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance. An electronic circuit controls the pump current through the oxygen pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800°C (1,292 - 1,472°F).
OBDII Code P0130 Nissan - Air Fuel Ratio Circuit Bank 1 Sensor 1 - AutoCodes.com
P0130 Nissan Code - Air Fuel Ratio Circuit Bank 1 Sensor 1

What are the Possible Causes of the DTC P0130 Nissan?

  • Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1
  • Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted
  • Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection
  • Inappropriate fuel pressure
  • Faulty fuel injectors
  • Intake air leaks may be faulty
  • Exhaust gas leaks

How to Fix the DTC P0130 Nissan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0130 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0130 Nissan code?

Need more information on how to fix the P0130 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0130 Nissan code diagnosed by a professional: Find a repair shop in your area

Information for Specific Nissan Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0130 Nissan Code

1. What are the common symptoms of OBDII code P0130 in a Nissan?

The common symptoms of code P0130 in a Nissan include poor fuel economy, rough idling, engine misfires, and the illumination of the check engine light.

2. What does the OBDII code P0130 on a Nissan mean?

Code P0130 in a Nissan indicates a malfunction in the Air Fuel Ratio Circuit Bank 1 Sensor 1, which is the oxygen sensor located before the catalytic converter.

3. What are the possible causes of OBDII code P0130 in a Nissan?

The potential causes of code P0130 in a Nissan include a faulty oxygen sensor, wiring issues in the sensor circuit, exhaust leaks, or a problem with the engine's fuel system.

4. How can I diagnose the OBDII code P0130 in my Nissan?

Diagnosing code P0130 in a Nissan involves using an OBDII scanner to retrieve the specific fault code, inspecting the oxygen sensor and its wiring for damage, and checking for any exhaust leaks.

5. Can I drive my Nissan with OBDII code P0130?

It is not recommended to drive your Nissan with code P0130, as it can lead to poor engine performance and potential damage to the catalytic converter. It is best to address the issue promptly.

6. How do I repair OBDII code P0130 in my Nissan?

Repairing code P0130 in a Nissan may involve replacing the faulty oxygen sensor, repairing damaged wiring, fixing any exhaust leaks, or addressing issues with the fuel system as needed.

7. Is it possible to reset OBDII code P0130 in a Nissan without fixing the underlying issue?

Resetting the code without addressing the underlying problem may temporarily turn off the check engine light, but the code is likely to return if the root cause is not resolved.

8. How much does it cost to fix OBDII code P0130 in a Nissan?

The cost of fixing code P0130 in a Nissan can vary depending on the specific issue causing the code, the labor rates of the repair shop, and the cost of any replacement parts needed.

9. How often does OBDII code P0130 occur in Nissan vehicles?

Code P0130 can occur in Nissan vehicles with higher mileage or as they age, especially if the oxygen sensor or related components begin to wear out or fail.

10. Can a DIY enthusiast repair OBDII code P0130 in a Nissan?

While some DIY enthusiasts may be able to address code P0130 by replacing the oxygen sensor or checking for wiring issues, it is recommended to consult a professional mechanic for accurate diagnosis and repair.

Discuss the causes and fixes for P0130 Nissan OBDII Code

  • Hi, my car is nissan altima 2013 2.5 sv
    coming 5 codes can you help me.
    p0130 p014d p014c p0172 p0443

  • Start by clearing all the codes and then check what code comes back first.. Sounds like you may have a problem with the Mass Air Flow (MAF) sensor. Also make sure the air filter and air filter box are clean.

  • Hi,i sorry i forget to tell you there red oil on air filter?I changed the air filter and agin coming red oil on the filter OMG from where coming that oil ,and i changed MAF sensor still same problem,thanks please help me.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play