P0130 2008 Nissan Altima Sedan Code - Air Fuel Ratio Circuit Bank 1 Sensor 1
Quick Answer
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. Common causes include Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1, Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted, Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0130 2008 Nissan Altima Sedan indicates Air Fuel Ratio Circuit Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1, Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted, Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0130 2008 Nissan Altima Sedan Description
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance. An electronic circuit controls the pump current through the oxygen pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800°C (1,292 - 1,472°F).
What are the Possible Causes of the DTC P0130 2008 Nissan Altima Sedan?
- Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1
- Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted
- Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0130 2008 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0130 2008 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0130 2008 Nissan Altima Sedan code?
Need more information on how to fix the P0130 2008 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0130 2008 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0130 2008 Nissan Altima Sedan Code
1. What does OBDII code P0130 for a 2008 Nissan Altima Sedan indicate?
The code P0130 on a 2008 Nissan Altima Sedan refers to a malfunction in the Air Fuel Ratio Circuit for Bank 1 Sensor 1.
2. What are common symptoms of a P0130 code in a 2008 Nissan Altima Sedan?
Common symptoms of a P0130 code may include poor fuel economy, rough idling, engine hesitation, and an illuminated check engine light.
3. What are the possible causes of a P0130 code in a 2008 Nissan Altima Sedan?
Potential causes of a P0130 code include a faulty oxygen sensor, wiring issues in the sensor circuit, exhaust leaks, or a problem with the engine's fuel system.
4. How can I diagnose a P0130 code in my 2008 Nissan Altima Sedan?
Diagnosing a P0130 code usually involves testing the oxygen sensor's voltage output, inspecting the sensor wiring for damage, and checking for any exhaust leaks near the sensor.
5. Can I drive my 2008 Nissan Altima Sedan with a P0130 code?
It is generally not recommended to drive your vehicle with a P0130 code, as it can lead to decreased fuel efficiency and potential engine damage if left unresolved.
6. How can I repair a P0130 code in my 2008 Nissan Altima Sedan?
Repairing a P0130 code may involve replacing the Bank 1 Sensor 1 oxygen sensor, repairing any damaged wiring, fixing exhaust leaks, or addressing issues with the fuel system.
7. How much does it cost to fix a P0130 code in a 2008 Nissan Altima Sedan?
The cost of repairing a P0130 code can vary depending on the specific issue causing the code. Costs may include parts such as an oxygen sensor and labor for diagnosis and repair.
8. Can I reset the check engine light after fixing a P0130 code in my 2008 Nissan Altima Sedan?
Yes, once the underlying issue causing the P0130 code has been addressed, you can reset the check engine light using an OBDII scanner or by disconnecting the car's battery for a few minutes.
9. How often should the oxygen sensors be replaced in a 2008 Nissan Altima Sedan?
Oxygen sensors typically last between 50,000 to 100,000 miles. However, it is recommended to follow the manufacturer's maintenance schedule for sensor replacement.
10. Is a P0130 code a common issue in 2008 Nissan Altima Sedans?
While P0130 codes can occur in 2008 Nissan Altima Sedans, they are not the most common issue. Regular maintenance and prompt diagnosis of any check engine light codes can help prevent more significant problems.
Discuss the causes and fixes for P0130 2008 Nissan Altima Sedan OBDII Code
Code P0130 2008 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
