P0130 2010 Nissan Rogue Code - Air Fuel Ratio Circuit Bank 1 Sensor 1
Quick Answer
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. Common causes include Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1, Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted, Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0130 2010 Nissan Rogue indicates Air Fuel Ratio Circuit Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1, Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted, Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0130 2010 Nissan Rogue Description
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance. An electronic circuit controls the pump current through the oxygen pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800°C (1,292 - 1,472°F).
What are the Possible Causes of the DTC P0130 2010 Nissan Rogue?
- Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1
- Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted
- Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0130 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0130 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0130 2010 Nissan Rogue code?
Need more information on how to fix the P0130 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0130 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0130 2010 Nissan Rogue Code
1. What does the OBDII code P0130 for a 2010 Nissan Rogue indicate?
- The code P0130 indicates an issue with the Air Fuel Ratio Circuit for Bank 1 Sensor 1 in the vehicle's oxygen sensor.
2. What are the common symptoms of a P0130 code in a Nissan Rogue?
- Common symptoms include poor fuel economy, rough idling, engine misfires, and the illumination of the check engine light.
3. What are the possible causes of a P0130 code in a 2010 Nissan Rogue?
- Possible causes include a faulty oxygen sensor, wiring problems in the sensor circuit, exhaust leaks, or issues with the engine's air-fuel mixture.
4. How can I diagnose a P0130 code in my Nissan Rogue?
- Diagnosing a P0130 code typically involves using an OBDII scanner to retrieve the code, testing the oxygen sensor with a multimeter, and inspecting the sensor's wiring for any damage.
5. Can I still drive my Nissan Rogue with a P0130 code?
- It is generally not recommended to drive your vehicle with a P0130 code, as it can lead to decreased fuel efficiency and potentially cause further damage to the engine over time.
6. How can I repair a P0130 code in my 2010 Nissan Rogue?
- Repair options may include replacing the Bank 1 Sensor 1 oxygen sensor, repairing any damaged wiring, fixing exhaust leaks, or addressing issues with the engine's air-fuel mixture.
7. Are there any DIY tips for fixing a P0130 code in a Nissan Rogue?
- While some may attempt to replace the oxygen sensor themselves, it's recommended to consult a professional mechanic for accurate diagnosis and proper repair of the issue.
8. How much does it cost to repair a P0130 code in a Nissan Rogue?
- The cost of repairing a P0130 code can vary depending on the cause of the issue, but it typically ranges from $150 to $400 for parts and labor.
9. Will a P0130 code reset itself after repairs are made in a 2010 Nissan Rogue?
- After repairs are made, the P0130 code can be cleared using an OBDII scanner. If the underlying issue is properly fixed, the code should not reappear.
10. How often should I check the oxygen sensors in my Nissan Rogue to prevent a P0130 code?
- It's recommended to have the oxygen sensors inspected during routine maintenance or whenever you notice any symptoms related to fuel efficiency or engine performance.
Discuss the causes and fixes for P0130 2010 Nissan Rogue OBDII Code
Code P0130 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
