P0130 2010 Nissan Altima Sedan Code - Air Fuel Ratio Circuit Bank 1 Sensor 1
Quick Answer
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. Common causes include Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1, Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted, Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0130 2010 Nissan Altima Sedan indicates Air Fuel Ratio Circuit Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1, Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted, Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0130 2010 Nissan Altima Sedan Description
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance. An electronic circuit controls the pump current through the oxygen pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800°C (1,292 - 1,472°F).
What are the Possible Causes of the DTC P0130 2010 Nissan Altima Sedan?
- Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1
- Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted
- Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0130 2010 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0130 2010 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0130 2010 Nissan Altima Sedan code?
Need more information on how to fix the P0130 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0130 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0130 2010 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0130 in a 2010 Nissan Altima Sedan?
- Common symptoms include poor fuel economy, rough idling, engine misfires, and the illumination of the Check Engine Light.
2. What does the OBDII code P0130 for the Air Fuel Ratio Circuit Bank 1 Sensor 1 indicate in a 2010 Nissan Altima Sedan?
- This code indicates a malfunction in the oxygen sensor located in the exhaust system before the catalytic converter.
3. What are the possible causes of OBDII code P0130 in a 2010 Nissan Altima Sedan?
- Possible causes include a faulty oxygen sensor, damaged wiring or connectors, exhaust leaks, or issues with the engine's air-fuel ratio.
4. How can I diagnose the OBDII code P0130 in my 2010 Nissan Altima Sedan?
- You can diagnose this code using an OBDII scanner to retrieve the specific error codes and inspecting the oxygen sensor, wiring, and related components for any visible damage.
5. Can I continue driving my 2010 Nissan Altima Sedan with OBDII code P0130?
- It is not recommended to continue driving with this code as it can lead to decreased fuel efficiency and potential damage to the catalytic converter over time.
6. How can I repair OBDII code P0130 in a 2010 Nissan Altima Sedan?
- Repairing this code typically involves replacing the faulty oxygen sensor, repairing any damaged wiring or connectors, and addressing any underlying issues affecting the air-fuel ratio.
7. Is it possible to reset the Check Engine Light after fixing OBDII code P0130 in a 2010 Nissan Altima Sedan?
- Yes, the Check Engine Light can be reset using an OBDII scanner after the issue causing the P0130 code has been successfully repaired.
8. Are there any preventive measures to avoid OBDII code P0130 in a 2010 Nissan Altima Sedan?
- Regular maintenance, such as checking and replacing the oxygen sensor at recommended intervals, can help prevent the occurrence of OBDII code P0130.
9. Can a DIY enthusiast with basic automotive skills fix OBDII code P0130 in a 2010 Nissan Altima Sedan?
- Depending on the skill level and tools available, a DIY enthusiast may be able to replace the oxygen sensor and address basic wiring issues related to the P0130 code.
10. How long does it typically take to repair OBDII code P0130 in a 2010 Nissan Altima Sedan?
- The repair time can vary based on the extent of the issue, but replacing the oxygen sensor and addressing related issues usually takes a few hours to complete.
Discuss the causes and fixes for P0130 2010 Nissan Altima Sedan OBDII Code
Code P0130 2010 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
