AutoCodes – Ford – P010F Ford

P010F Ford Code - Mass or Volume Air Flow Sensor 'A'/'B' Correlation

Quick Answer

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 1 Sensor 1 (MAF11), Faulty Mass Airflow Bank 2 Sensor 1 (MAF21). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P010F Ford indicates Mass or Volume Air Flow Sensor 'A'/'B' Correlation.
Common causes: Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 1 Sensor 1 (MAF11), Faulty Mass Airflow Bank 2 Sensor 1 (MAF21).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 578

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 22, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P010F Ford Description

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. The air passing over the hot wire causes it to cool. This hot wire is maintained at 200°C (392°F) above the ambient temperature as measured by a constant cold wire. The current required to maintain the temperature of the hot wire is proportional to the mass airflow. The MAF Sensor then outputs a signal to the Powertrain Control Module (PCM) proportional to the intake air mass. The PCM calculates the required fuel injector pulse width in order to provide the desired air to fuel ratio. The MAF sensor is located near the air cleaner assembly. Most MAF sensors have an integrated Intake Air Temperature (IAT) sensor. This Diagnostic Trouble Code (DTC) sets when the Mass Airflow Bank 1, Sensor 1 (MAF11) value combined with the Mass Airflow Bank 2, Sensor 1 (MAF21) value is within an expected range for the current operating conditions, and the MAF11 value is greater than or less than the MAF21 value.

OBDII Code P010F Ford - Mass or Volume Air Flow Sensor 'A'/'B' Correlation - AutoCodes.com — P010F Ford Code - Mass or Volume Air Flow Sensor 'A'/'B' Correlation

What does this mean?

What are the Possible Causes of the DTC P010F Ford?

Dirty Air Filter
Faulty Mass Airflow Bank 1 Sensor 1 (MAF11)
Faulty Mass Airflow Bank 2 Sensor 1 (MAF21)
Mass Airflow Bank 1 or Bank 2 Sensor 1 harness is open or shorted
Mass Airflow Bank 1 or Bank 2 Sensor 1 circuit poor electrical connection

How to Fix the DTC P010F Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low-compressed air or a Mass Air Flow Sensor Cleaner. Reset the code and drive the vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P010F Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P010F Ford code?

Need more information on how to fix the P010F Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P010F Ford code diagnosed by a professional: Find a repair shop in your area

Information for Specific Ford Models

P010F 2015 Ford F150 — Mass or Volume Air Flow Sensor 'A'/'B' Correlation
P010F 2016 Ford F150 — Mass or Volume Air Flow Sensor 'A'/'B' Correlation
P010F 2017 Ford F150 — Mass or Volume Air Flow Sensor 'A'/'B' Correlation
P010F 2018 Ford F150 — Mass or Volume Air Flow Sensor 'A'/'B' Correlation
P010F 2019 Ford F150 — Mass or Volume Air Flow Sensor 'A'/'B' Correlation
P010F 2020 Ford F150 — Mass or Volume Air Flow Sensor 'A'/'B' Correlation

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P010F Ford Code

What does the OBDII code P010F mean on a Ford vehicle?

P010F indicates an issue with the Mass or Volume Air Flow Sensor 'A' and 'B' correlation, meaning the readings from the two sensors are inconsistent or out of range.

What are the common symptoms of code P010F on a Ford?

Symptoms may include poor engine performance, reduced fuel efficiency, rough idling, hesitation during acceleration, and an illuminated check engine light.

What causes the P010F code to appear on a Ford?

Possible causes include dirty or faulty mass air flow (MAF) sensors, damaged sensor wiring or connectors, air intake leaks, or an engine control module (ECM) malfunction.

Can a dirty air filter cause the P010F code?

Yes, a clogged or excessively dirty air filter can restrict airflow and lead to inaccurate MAF sensor readings, potentially triggering the P010F code.

How do I fix the P010F code on a Ford?

Common fixes include cleaning or replacing the MAF sensors, inspecting and repairing wiring or connectors, replacing the air filter, and checking for air intake leaks.

Can I drive my Ford with the P010F code active?

Driving with the P010F code is not recommended, as it can cause poor engine performance, reduced fuel efficiency, and potential long-term engine damage if not addressed.

How do I clean a mass air flow sensor to fix the P010F code?

Use a specialized MAF sensor cleaner and avoid touching the sensor element. Spray the cleaner onto the sensor, let it dry completely, and reinstall it to see if the issue is resolved.

Will disconnecting the battery clear the P010F code?

Disconnecting the battery may clear the code temporarily, but it wonâ€™t fix the underlying problem. The code will likely return if the issue isnâ€™t resolved.

Can a vacuum leak cause the P010F code on a Ford?

Yes, a vacuum or air intake leak can cause discrepancies in MAF sensor readings, potentially triggering the P010F code.

Do both MAF sensors need to be replaced to fix the P010F code?

Not necessarily. Test each sensor to determine if one is faulty. In some cases, cleaning or repairing sensor wiring may resolve the issue without replacing both sensors.