AutoCodes – Ford – P010F 2020 Ford F150

P010F 2020 Ford F150 Code - Mass or Volume Air Flow Sensor 'A'/'B' Correlation

Quick Answer

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 1 Sensor 1 (MAF11), Faulty Mass Airflow Bank 2 Sensor 1 (MAF21). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P010F 2020 Ford F150 indicates Mass or Volume Air Flow Sensor 'A'/'B' Correlation.
Common causes: Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 1 Sensor 1 (MAF11), Faulty Mass Airflow Bank 2 Sensor 1 (MAF21).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 199

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 22, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P010F 2020 Ford F150 Description

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. The air passing over the hot wire causes it to cool. This hot wire is maintained at 200°C (392°F) above the ambient temperature as measured by a constant cold wire. The current required to maintain the temperature of the hot wire is proportional to the mass airflow. The MAF Sensor then outputs a signal to the Powertrain Control Module (PCM) proportional to the intake air mass. The PCM calculates the required fuel injector pulse width in order to provide the desired air to fuel ratio. The MAF sensor is located near the air cleaner assembly. Most MAF sensors have an integrated Intake Air Temperature (IAT) sensor. This Diagnostic Trouble Code (DTC) sets when the Mass Airflow Bank 1, Sensor 1 (MAF11) value combined with the Mass Airflow Bank 2, Sensor 1 (MAF21) value is within an expected range for the current operating conditions, and the MAF11 value is greater than or less than the MAF21 value.

OBDII Code P010F 2020 Ford F150 - Mass or Volume Air Flow Sensor 'A'/'B' Correlation - AutoCodes.com — P010F 2020 Ford F150 Code - Mass or Volume Air Flow Sensor 'A'/'B' Correlation

What does this mean?

What are the Possible Causes of the DTC P010F 2020 Ford F150?

Dirty Air Filter
Faulty Mass Airflow Bank 1 Sensor 1 (MAF11)
Faulty Mass Airflow Bank 2 Sensor 1 (MAF21)
Mass Airflow Bank 1 or Bank 2 Sensor 1 harness is open or shorted
Mass Airflow Bank 1 or Bank 2 Sensor 1 circuit poor electrical connection

How to Fix the DTC P010F 2020 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low-compressed air or a Mass Air Flow Sensor Cleaner. Reset the code and drive the vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P010F 2020 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P010F 2020 Ford F150 code?

Need more information on how to fix the P010F 2020 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P010F 2020 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P010F 2020 Ford F150 Code

1. What does the OBDII code P010F on a 2020 Ford F150 indicate?

The code P010F indicates a Mass or Volume Air Flow Sensor 'A'/'B' Correlation issue on the 2020 Ford F150.

2. What are the common symptoms of a P010F code on a Ford F150?

Common symptoms of a P010F code may include rough idling, poor acceleration, decreased fuel efficiency, and potential stalling of the vehicle.

3. What are the possible causes of a P010F code on a 2020 Ford F150?

Possible causes of a P010F code include a faulty mass airflow sensor, wiring issues, vacuum leaks, or a problem with the engine control module.

4. How can I diagnose a P010F code on my 2020 Ford F150?

Diagnosing a P010F code usually involves inspecting the mass airflow sensor, checking for any damaged wiring, verifying vacuum integrity, and using a scan tool to analyze sensor data.

5. Can I still drive my 2020 Ford F150 with a P010F code?

It is not recommended to drive your Ford F150 with a P010F code, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.

6. How can I repair a P010F code on my 2020 Ford F150?

Repairing a P010F code typically involves replacing the faulty mass airflow sensor, repairing any damaged wiring, fixing vacuum leaks, or reprogramming the engine control module if necessary.

7. Is it possible to reset a P010F code on a 2020 Ford F150 without fixing the underlying issue?

While you can clear the code temporarily, it is not advisable to reset a P010F code without fixing the root cause, as the issue will likely reoccur and potentially worsen over time.

8. How much does it cost to repair a P010F code on a 2020 Ford F150?

The cost of repairing a P010F code can vary depending on the exact cause of the issue, but it may range from $100 to $500 or more, including parts and labor.

9. Can a P010F code on a 2020 Ford F150 be prevented?

Regular maintenance, such as cleaning or replacing the mass airflow sensor at recommended intervals, can help prevent a P010F code from occurring on your Ford F150.

10. Will a P010F code on a 2020 Ford F150 affect the vehicle's emissions?

Yes, a P010F code can impact the emissions of your Ford F150, leading to increased levels of pollutants being released into the environment. Addressing the issue promptly can help reduce emissions.