AutoCodes – Ford – P010F 2019 Ford F150

P010F 2019 Ford F150 Code - Mass or Volume Air Flow Sensor 'A'/'B' Correlation

Quick Answer

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 1 Sensor 1 (MAF11), Faulty Mass Airflow Bank 2 Sensor 1 (MAF21). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P010F 2019 Ford F150 indicates Mass or Volume Air Flow Sensor 'A'/'B' Correlation.
Common causes: Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 1 Sensor 1 (MAF11), Faulty Mass Airflow Bank 2 Sensor 1 (MAF21).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 167

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 22, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P010F 2019 Ford F150 Description

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. The air passing over the hot wire causes it to cool. This hot wire is maintained at 200°C (392°F) above the ambient temperature as measured by a constant cold wire. The current required to maintain the temperature of the hot wire is proportional to the mass airflow. The MAF Sensor then outputs a signal to the Powertrain Control Module (PCM) proportional to the intake air mass. The PCM calculates the required fuel injector pulse width in order to provide the desired air to fuel ratio. The MAF sensor is located near the air cleaner assembly. Most MAF sensors have an integrated Intake Air Temperature (IAT) sensor. This Diagnostic Trouble Code (DTC) sets when the Mass Airflow Bank 1, Sensor 1 (MAF11) value combined with the Mass Airflow Bank 2, Sensor 1 (MAF21) value is within an expected range for the current operating conditions, and the MAF11 value is greater than or less than the MAF21 value.

OBDII Code P010F 2019 Ford F150 - Mass or Volume Air Flow Sensor 'A'/'B' Correlation - AutoCodes.com — P010F 2019 Ford F150 Code - Mass or Volume Air Flow Sensor 'A'/'B' Correlation

What does this mean?

What are the Possible Causes of the DTC P010F 2019 Ford F150?

Dirty Air Filter
Faulty Mass Airflow Bank 1 Sensor 1 (MAF11)
Faulty Mass Airflow Bank 2 Sensor 1 (MAF21)
Mass Airflow Bank 1 or Bank 2 Sensor 1 harness is open or shorted
Mass Airflow Bank 1 or Bank 2 Sensor 1 circuit poor electrical connection

How to Fix the DTC P010F 2019 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low-compressed air or a Mass Air Flow Sensor Cleaner. Reset the code and drive the vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P010F 2019 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P010F 2019 Ford F150 code?

Need more information on how to fix the P010F 2019 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P010F 2019 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P010F 2019 Ford F150 Code

1. What does the OBDII code P010F mean for a 2019 Ford F150?

The P010F code on a 2019 Ford F150 indicates a problem with the Mass or Volume Air Flow Sensor 'A'/'B' Correlation.

2. What are the common symptoms of a P010F code in a 2019 Ford F150?

Common symptoms of a P010F code in a 2019 Ford F150 may include poor engine performance, rough idling, reduced fuel efficiency, and possibly stalling.

3. What are the possible causes of the P010F code in a 2019 Ford F150?

Potential causes of a P010F code in a 2019 Ford F150 include a faulty mass air flow sensor, a vacuum leak, a dirty air filter, or issues with the air intake system.

4. How can I diagnose the P010F code on my 2019 Ford F150?

Diagnosing a P010F code on a 2019 Ford F150 involves checking the mass air flow sensor for proper operation, inspecting the air intake system for any leaks or obstructions, and ensuring the air filter is clean.

5. Can I drive my 2019 Ford F150 with a P010F code?

It is generally not recommended to drive a 2019 Ford F150 with a P010F code, as it can lead to further engine damage and decreased performance. It's best to address the issue promptly.

6. How can I repair a P010F code on my 2019 Ford F150?

Repairing a P010F code on a 2019 Ford F150 may involve replacing the mass air flow sensor, fixing any vacuum leaks, cleaning or replacing the air filter, and clearing the trouble code from the vehicle's computer.

7. Is it possible to reset the P010F code on a 2019 Ford F150 without repairs?

While you can clear the P010F code from a 2019 Ford F150's system without making repairs, it is not recommended. Ignoring the underlying issue may lead to more severe problems down the line.

8. How much does it cost to fix a P010F code on a 2019 Ford F150?

The cost of fixing a P010F code on a 2019 Ford F150 can vary depending on the exact cause of the issue, the required repairs, and labor costs. It's advisable to consult a mechanic for a more accurate estimate.

9. Can a P010F code on a 2019 Ford F150 cause other problems if left unresolved?

Yes, if left unresolved, a P010F code on a 2019 Ford F150 can potentially lead to reduced engine performance, decreased fuel efficiency, and other issues that may affect the vehicle's overall drivability.

10. Are there any preventive measures to avoid a P010F code on a 2019 Ford F150?

Regular maintenance, such as replacing the air filter at recommended intervals, checking for vacuum leaks, and ensuring the mass air flow sensor is clean, can help prevent the occurrence of a P010F code on a 2019 Ford F150.