AutoCodes – Ford – P010F 2015 Ford F150

P010F 2015 Ford F150 Code - Mass or Volume Air Flow Sensor 'A'/'B' Correlation

Quick Answer

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 1 Sensor 1 (MAF11), Faulty Mass Airflow Bank 2 Sensor 1 (MAF21). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P010F 2015 Ford F150 indicates Mass or Volume Air Flow Sensor 'A'/'B' Correlation.
Common causes: Common causes include Dirty Air Filter, Faulty Mass Airflow Bank 1 Sensor 1 (MAF11), Faulty Mass Airflow Bank 2 Sensor 1 (MAF21).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 207

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 22, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P010F 2015 Ford F150 Description

The Mass Airflow (MAF) Sensor uses a hot wire sensing element to measure the amount of air entering the engine. The air passing over the hot wire causes it to cool. This hot wire is maintained at 200°C (392°F) above the ambient temperature as measured by a constant cold wire. The current required to maintain the temperature of the hot wire is proportional to the mass airflow. The MAF Sensor then outputs a signal to the Powertrain Control Module (PCM) proportional to the intake air mass. The PCM calculates the required fuel injector pulse width in order to provide the desired air to fuel ratio. The MAF sensor is located near the air cleaner assembly. Most MAF sensors have an integrated Intake Air Temperature (IAT) sensor. This Diagnostic Trouble Code (DTC) sets when the Mass Airflow Bank 1, Sensor 1 (MAF11) value combined with the Mass Airflow Bank 2, Sensor 1 (MAF21) value is within an expected range for the current operating conditions, and the MAF11 value is greater than or less than the MAF21 value.

OBDII Code P010F 2015 Ford F150 - Mass or Volume Air Flow Sensor 'A'/'B' Correlation - AutoCodes.com — P010F 2015 Ford F150 Code - Mass or Volume Air Flow Sensor 'A'/'B' Correlation

What does this mean?

What are the Possible Causes of the DTC P010F 2015 Ford F150?

Dirty Air Filter
Faulty Mass Airflow Bank 1 Sensor 1 (MAF11)
Faulty Mass Airflow Bank 2 Sensor 1 (MAF21)
Mass Airflow Bank 1 or Bank 2 Sensor 1 harness is open or shorted
Mass Airflow Bank 1 or Bank 2 Sensor 1 circuit poor electrical connection

How to Fix the DTC P010F 2015 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) Sensor, try replacing the air filter and cleaning the Mass Air Flow Sensor with low-compressed air or a Mass Air Flow Sensor Cleaner. Reset the code and drive the vehicle. If the code comes back, you must replace the Mass Air Flow Sensor to fix the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P010F 2015 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P010F 2015 Ford F150 code?

Need more information on how to fix the P010F 2015 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P010F 2015 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P010F 2015 Ford F150 Code

1. What are the common symptoms of OBDII code P010F in a 2015 Ford F150?

- Common symptoms include reduced engine performance, rough idling, stalling, and increased fuel consumption.

2. What does the OBDII code P010F 'Mass or Volume Air Flow Sensor 'A'/'B' Correlation' mean for a 2015 Ford F150?

- This code indicates that there is a correlation problem between the Mass Air Flow (MAF) sensor 'A' and 'B' in the vehicle's air intake system.

3. What are the possible causes of OBDII code P010F in a 2015 Ford F150?

- The code can be triggered by issues such as a faulty MAF sensor, air leaks in the intake system, dirty air filter, or wiring/connectivity problems.

4. How can I diagnose the cause of OBDII code P010F in my 2015 Ford F150?

- Diagnosis typically involves inspecting the MAF sensor, checking for air leaks in the intake system, examining the air filter, and testing the sensor's wiring and connections.

5. Can I drive my 2015 Ford F150 with OBDII code P010F?

- It is not recommended to drive the vehicle with this code present, as it can lead to poor engine performance and potential damage if left unresolved.

6. How can I repair OBDII code P010F in my 2015 Ford F150?

- Repair options may include cleaning or replacing the MAF sensor, fixing any air leaks, replacing the air filter, and ensuring all wiring and connections are secure.

7. Will resetting the OBDII code P010F in my 2015 Ford F150 make it go away permanently?

- Resetting the code may temporarily turn off the check engine light, but if the underlying issue is not fixed, the code is likely to reappear.

8. Is it possible to prevent OBDII code P010F from appearing in my 2015 Ford F150?

- Regular maintenance, such as replacing air filters on schedule, checking for air leaks, and keeping the MAF sensor clean, can help prevent this code from triggering.

9. How much does it cost to fix OBDII code P010F in a 2015 Ford F150?

- The cost of repairs can vary depending on the exact cause of the code, but it may involve expenses for parts and labor, ranging from a few hundred to over a thousand dollars.

10. Can OBDII code P010F in a 2015 Ford F150 cause long-term damage if not addressed promptly?

- Ignoring this code can potentially lead to decreased engine efficiency, increased emissions, and other engine-related issues over time if not addressed promptly.