AutoCodes – Generic – P0336

P0336 Code - Crankshaft Position Sensor 'A' Circuit Range/Performance

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0336 indicates Crankshaft Position Sensor 'A' Circuit Range/Performance.
Common causes: Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 83,296

How popular is this code, among other codes? Medium

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 09, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0336 Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Electronic Control Module(ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.

OBDII Code P0336 - Crankshaft Position Sensor 'A' Circuit Range/Performance - AutoCodes.com — P0336 Code - Crankshaft Position Sensor 'A' Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0336?

Faulty crankshaft position sensor
Crankshaft position sensor harness is open or shorted
Crankshaft position sensor circuit poor electrical connection
Signal plate may be damage
Starter motor may be faulty
Starting system circuit
Dead or weak battery

How to Fix the DTC P0336?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0336 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0336 code?

Need more information on how to fix the P0336 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0336 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P0336 Acura — Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 Buick — Crankshaft Position Sensor Performance
P0336 Cadillac — Crankshaft Position Sensor Performance
P0336 Chevrolet — Crankshaft Position Sensor Performance
P0336 Chrysler — Crankshaft Position Sensor Performace
P0336 Dodge — Crankshaft Position Sensor Performace
P0336 Ford — Crankshaft Position Sensor 'A' Circuit Range/Performance Condition
P0336 GMC — Crankshaft Position Sensor Performance
P0336 Honda — Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 Hyundai — Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 Isuzu — Crankshaft Position Sensor Performance
P0336 Jaguar — Crankshaft Position Sensor 'A' Circuit Range/Performance Condition
P0336 Jeep — Crankshaft Position Sensor Performace
P0336 KIA — Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 Lexus — Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 Lincoln — Crankshaft Position Sensor 'A' Circuit Range/Performance Condition
P0336 Mazda — Eccentric Shaft Position Sensor Circuit Range/Performance
P0336 Mercedes-Benz — Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 Mercury — Crankshaft Position Sensor 'A' Circuit Range/Performance Condition
P0336 Pontiac — Crankshaft Position Sensor Performance
P0336 Saturn — Crankshaft Position Sensor Performance
P0336 Scion — Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 Subaru — Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 Toyota — Crankshaft Position Sensor 'A' Circuit Range/Performance

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0336 Code

1. What are the common symptoms of OBDII code P0336 (Crankshaft Position Sensor 'A' Circuit Range/Performance)?

- Common symptoms include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.

2. What are the possible causes of OBDII code P0336?

- The code P0336 can be caused by a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine's timing belt or chain.

3. How can I diagnose the cause of OBDII code P0336?

- Diagnosing the code usually involves using a scan tool to read the code and checking the crankshaft position sensor for proper operation, inspecting the sensor's wiring and connections, and testing the engine's timing.

4. Can I continue driving with OBDII code P0336 present?

- It is not recommended to continue driving with the P0336 code as it can lead to further engine damage or failure. It is best to address the issue promptly.

5. How can I repair OBDII code P0336?

- Repairing the P0336 code may involve replacing the crankshaft position sensor, repairing or replacing damaged wiring or connectors, or addressing any timing belt/chain issues as necessary.

6. Are there any DIY tips for fixing OBDII code P0336?

- DIY tips for fixing the P0336 code include checking the sensor's wiring for any visible damage, ensuring proper sensor alignment, and consulting the vehicle's service manual for specific repair procedures.

7. Can a faulty crankshaft position sensor cause other issues besides triggering code P0336?

- Yes, a faulty crankshaft position sensor can cause a variety of issues such as poor engine performance, misfiring, and even a no-start condition.

8. How long does it typically take to repair OBDII code P0336?

- The time to repair the P0336 code can vary depending on the exact cause of the issue, but it generally takes a few hours to a full day to diagnose and fix the problem.

9. Will resetting the check engine light clear OBDII code P0336?

- Resetting the check engine light will clear the code temporarily, but if the underlying issue causing the P0336 code is not addressed, the code will likely reappear.

10. Is it safe to ignore OBDII code P0336 if my vehicle seems to be running fine?

- Ignoring the P0336 code, even if the vehicle appears to be running fine, is not recommended as it can lead to more severe engine problems over time. It is best to address the issue promptly to prevent further damage.