P0336 Toyota Code - Crankshaft Position Sensor 'A' Circuit Range/Performance
Quick Answer
The Crankshaft position sensor also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0336 Toyota indicates Crankshaft Position Sensor 'A' Circuit Range/Performance.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0336 Toyota Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
*Sensor design may vary for your model and year
What are the Possible Causes of the DTC P0336 Toyota?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0336 Toyota?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0336 Toyota code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0336 Toyota code?
Need more information on how to fix the P0336 Toyota code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0336 Toyota code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0336 Toyota Code
1. What does the OBDII code P0336 mean for a Toyota?
P0336 indicates a problem with the Crankshaft Position Sensor 'A' circuit's range or performance, which can affect engine timing and operation.
2. What are the common symptoms of code P0336 in a Toyota?
Symptoms include engine misfires, rough idling, difficulty starting, reduced power, and the Check Engine Light being illuminated.
3. What causes the P0336 code on a Toyota?
Common causes include a faulty crankshaft position sensor, damaged wiring or connectors, a misaligned reluctor ring, or issues with the engine control module (ECM).
4. Can I drive my Toyota with a P0336 code?
Driving with this code is not recommended as it can lead to engine misfires, reduced performance, or stalling, potentially causing safety issues.
5. How do you diagnose the P0336 code on a Toyota?
Diagnosis involves inspecting the crankshaft position sensor, checking the wiring and connectors, verifying the reluctor ring’s alignment, and using an OBDII scanner to monitor sensor readings.
6. How do you repair a P0336 code on a Toyota?
Repairs may include replacing the crankshaft position sensor, repairing damaged wiring or connectors, realigning the reluctor ring, or addressing ECM issues.
7. How much does it cost to fix the P0336 code on a Toyota?
Repair costs vary but typically range from $150 to $400, depending on the issue and labor rates.
8. Can a dirty reluctor ring cause the P0336 code?
Yes, a dirty or damaged reluctor ring can prevent proper sensor readings and trigger the P0336 code.
9. Will clearing the P0336 code fix the problem in a Toyota?
Clearing the code may temporarily turn off the Check Engine Light, but the underlying issue must be resolved to prevent the code from returning.
10. How often does the crankshaft position sensor fail on a Toyota?
Crankshaft position sensors are generally durable but can fail due to age, heat, or electrical issues, particularly in high-mileage vehicles.
Discuss the causes and fixes for P0336 Toyota OBDII Code
Code P0336 Toyota comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
