AutoCodes – Honda – P0336 Honda

P0336 Honda Code - Crankshaft Position Sensor 'A' Circuit Range/Performance

Quick Answer

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty Crankshaft Position Sensor (CKP), Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0336 Honda indicates Crankshaft Position Sensor 'A' Circuit Range/Performance.
Common causes: Common causes include Faulty Crankshaft Position Sensor (CKP), Crankshaft Position Sensor harness is open or shorted, Crankshaft Position Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 69,594

How popular is this code, among other codes? Medium

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 23, 2023

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0336 Honda Description

The Crankshaft Position Sensor (CKP) also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. This information is used by the Engine Control Module (ECM) to control ignition and fuel injection. The sensor system consists of a rotating part, typically a disc, as well as a static part, the actual sensor.
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field causes the voltage from the sensor to change.
The Diagnostic Trouble Code (DTC) will be set when the CKP signal is not detected by the Engine Control Module during the first few seconds of engine cranking.

OBDII Code P0336 Honda - Crankshaft Position Sensor 'A' Circuit Range/Performance - AutoCodes.com — P0336 Honda Code - Crankshaft Position Sensor 'A' Circuit Range/Performance

What does this mean?

What are the Possible Causes of the DTC P0336 Honda?

Faulty Crankshaft Position Sensor (CKP)
Crankshaft Position Sensor harness is open or shorted
Crankshaft Position Sensor circuit poor electrical connection
Signal plate may be damaged
Starter motor may be faulty
Starting system circuit
Dead or weak battery

How to Fix the DTC P0336 Honda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replace the battery.

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0336 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0336 Honda code?

Need more information on how to fix the P0336 Honda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0336 Honda code diagnosed by a professional: Find a repair shop in your area

Information for Specific Honda Models

P0336 1996 Honda Civic — Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 1997 Honda Civic — Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 1998 Honda Civic — Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 1999 Honda Civic — Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 2000 Honda Civic — Crankshaft Position Sensor 'A' Circuit Range/Performance

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.