P0336 Hyundai Code - Crankshaft Position Sensor 'A' Circuit Range/Performance
Quick Answer
The Crankshaft position sensor also known as the crank position sensor is an electronic device used in an engine to record the rate at which the crankshaft is spinning. Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0336 Hyundai indicates Crankshaft Position Sensor 'A' Circuit Range/Performance.
- Common causes
- Common causes include Faulty crankshaft position sensor, Crankshaft position sensor harness is open or shorted, Crankshaft position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0336 Hyundai Description
When the engine is running, the high and low parts of the teeth cause the gap with the sensor to change. The changing gap causes the magnetic field near the sensor to change. The change in the magnetic field cause the voltage from the sensor to change.
*Sensor design may vary for your model and year
What are the Possible Causes of the DTC P0336 Hyundai?
- Faulty crankshaft position sensor
- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery
How to Fix the DTC P0336 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0336 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0336 Hyundai code?
Need more information on how to fix the P0336 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0336 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0336 Hyundai Code
1. What are the common symptoms of OBDII code P0336 in a Hyundai related to the Crankshaft Position Sensor 'A' Circuit Range/Performance issue?
- Common symptoms include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.
2. What are the possible causes of OBDII code P0336 in a Hyundai?
- The code P0336 can be triggered by a faulty crankshaft position sensor, damaged wiring or connectors, issues with the sensor's circuit, or a problem with the engine control module (ECM).
3. How can I diagnose the cause of OBDII code P0336 in my Hyundai?
- To diagnose the issue, you can use an OBDII scanner to read the fault codes, visually inspect the sensor and its wiring for any visible damage, and perform a continuity test on the sensor's circuit.
4. Can I continue to drive my Hyundai with OBDII code P0336 present?
- It is not recommended to drive your vehicle with the code P0336 as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.
5. Is it possible to repair OBDII code P0336 in a Hyundai by replacing the crankshaft position sensor?
- Yes, in many cases, replacing the faulty crankshaft position sensor can resolve the P0336 code. Ensure to use a high-quality sensor compatible with your Hyundai model.
6. Are there any DIY tips for repairing OBDII code P0336 in a Hyundai?
- DIY tips include checking and cleaning the sensor's connections, inspecting the sensor for physical damage, and following the manufacturer's guidelines for sensor replacement.
7. How much does it typically cost to repair OBDII code P0336 in a Hyundai at a professional repair shop?
- The cost of repairing the P0336 code can vary depending on the exact cause of the issue, but it typically ranges from $150 to $300 for parts and labor.
8. Can a faulty crankshaft position sensor cause other issues in a Hyundai besides triggering OBDII code P0336?
- Yes, a faulty crankshaft position sensor can cause issues such as misfires, poor acceleration, and incorrect fuel injection timing, affecting the overall performance of the vehicle.
9. Is resetting the OBDII system enough to clear the P0336 code in a Hyundai, or is further action needed?
- While resetting the system may temporarily clear the code, it is important to address the underlying issue causing the P0336 code to prevent it from reoccurring.
10. How long does it typically take to repair OBDII code P0336 related to the Crankshaft Position Sensor 'A' Circuit in a Hyundai?
- The repair time can vary based on the exact cause of the issue and the technician's expertise, but it usually takes around 1-2 hours to diagnose and replace the crankshaft position sensor.
Discuss the causes and fixes for P0336 Hyundai OBDII Code
Code P0336 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
