AutoCodes – Ford – P0060 Ford

P0060 Ford Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

The HO2S detects the presence of oxygen in the exhaust and produces a variable voltage according to the amount of oxygen detected. Common causes include Faulty Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22), Heated Oxygen Sensor Bank 2 Sensor 2 circuit open shorted to ground, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0060 Ford indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22), Heated Oxygen Sensor Bank 2 Sensor 2 circuit open shorted to ground, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 36,683

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Sep 08, 2023

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 Ford Description

The HO2S detects the presence of oxygen in the exhaust and produces a variable voltage according to the amount of oxygen detected. A high concentration of oxygen (lean air to fuel ratio) in the exhaust produces a voltage signal of less than 0.4 volt. A low concentration of oxygen (rich air to fuel ratio) produces a voltage signal greater than 0.6 volt. The HO2S provides feedback to the Powertrain Control Module (PCM) indicating air to fuel ratio in order to achieve a near stoichiometric air to fuel ratio of 14.7 to 1 (9 to 1 E100) during closed loop engine operation.
When the oxygen sensor is cold, disconnected, or on initial start-up, the voltage may read between 1.5 to 1.7 volts. The oxygen sensor voltage will decrease to the normal operating range of 0.0 to 1.1 volts during warm, stabilized engine running conditions.
The HO2S heater is embedded with a sensing element. The heating element heats the sensor to a temperature of 800°C (1,472°F). At approximately 300°C (572°F) the engine enters closed loop operation. The heater allows the engine to enter closed loop operation sooner.
This Diagnostic Trouble Code (DTC) sets when the heater current requirements are too low or too high in the Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22) circuit.

OBDII Code P0060 Ford - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 Ford Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 Ford?

Faulty Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22)
Heated Oxygen Sensor Bank 2 Sensor 2 circuit open shorted to ground
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection

How to Fix the DTC P0060 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 Ford code?

Need more information on how to fix the P0060 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 Ford code diagnosed by a professional: Find a repair shop in your area

Information for Specific Ford Models

P0060 2015 Ford F150 — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2016 Ford F150 — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2017 Ford F150 — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2018 Ford F150 — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2019 Ford F150 — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2020 Ford F150 — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2006 Ford Fusion — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2007 Ford Fusion — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2008 Ford Fusion — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2009 Ford Fusion — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2010 Ford Fusion — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2011 Ford Fusion — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2012 Ford Fusion — HO2S Heater Resistance Bank 2 Sensor 2

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 Ford Code

1. What are the common symptoms of OBDII code P0060 on a Ford vehicle?

- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and the illumination of the check engine light.

2. What does the OBDII code P0060 for HO2S Heater Resistance Bank 2 Sensor 2 mean in a Ford?

- This code indicates an issue with the heater circuit of the oxygen sensor located in Bank 2 Sensor 2 of the vehicle's exhaust system.

3. What are the possible causes of OBDII code P0060 on a Ford?

- Possible causes include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, a blown fuse, or a problem with the engine control module (ECM).

4. How can I diagnose the OBDII code P0060 on my Ford vehicle?

- You can diagnose this code using an OBDII scanner to retrieve the specific fault code, visually inspect the sensor and its wiring for any damage, and test the sensor's resistance with a multimeter.

5. Can I continue driving my Ford with the OBDII code P0060 present?

- It is not recommended to continue driving with this code present, as it can lead to poor engine performance and potentially cause damage to other components over time.

6. How can I repair OBDII code P0060 on my Ford?

- Repair options may include replacing the Bank 2 Sensor 2 oxygen sensor, repairing or replacing damaged wiring or connectors, checking and replacing any blown fuses, or addressing any ECM issues.

7. Are there any DIY tips for fixing OBDII code P0060 on my Ford?

- DIY tips include ensuring the vehicle is safely lifted and supported before attempting any repairs, using proper tools for sensor removal and installation, and carefully following repair procedures outlined in a service manual.

8. How much does it typically cost to repair OBDII code P0060 on a Ford?

- The cost of repair can vary depending on the root cause of the issue, the labor rates in your area, and whether you choose to do the repair yourself or take it to a professional mechanic. Costs can range from relatively inexpensive for DIY repairs to more expensive for sensor replacements or ECM issues.

9. Can a faulty oxygen sensor cause OBDII code P0060 on a Ford?

- Yes, a faulty oxygen sensor in Bank 2 Sensor 2 can cause the heater resistance issue indicated by OBDII code P0060.

10. How long does it take to repair OBDII code P0060 on a Ford?

- The repair time can vary depending on the exact cause of the issue, the accessibility of the sensor, and your level of experience with automotive repairs. In general, it can take anywhere from 1-3 hours for a straightforward sensor replacement to longer if wiring or ECM issues are involved.