P0060 2006 Ford Fusion Code - HO2S Heater Resistance Bank 2 Sensor 2
Quick Answer
The Heated Oxygen Sensor (HO2S) must reach the operating temperature to provide an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0060 2006 Ford Fusion indicates HO2S Heater Resistance Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0060 2006 Ford Fusion Description
What are the Possible Causes of the DTC P0060 2006 Ford Fusion?
- Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2
- Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted
- Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0060 2006 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0060 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0060 2006 Ford Fusion code?
Need more information on how to fix the P0060 2006 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0060 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0060 2006 Ford Fusion Code
1. What are the common symptoms of OBDII code P0060 on a 2006 Ford Fusion?
- Common symptoms may include rough idling, reduced engine performance, and an illuminated check engine light.
2. What does the OBDII code P0060 indicate for a 2006 Ford Fusion?
- The code P0060 specifically refers to a fault in the HO2S (Heated Oxygen Sensor) Heater Resistance for Bank 2 Sensor 2.
3. What are the potential causes of OBDII code P0060 on a 2006 Ford Fusion?
- Possible causes include a faulty HO2S heater, damaged wiring or connectors, a blown fuse, or an issue with the ECM (Engine Control Module).
4. How can I diagnose the OBDII code P0060 on a 2006 Ford Fusion?
- Diagnosing the code typically involves checking the wiring and connectors for damage, testing the heater circuit resistance, and verifying the functionality of the HO2S sensor.
5. Can I continue driving my 2006 Ford Fusion with OBDII code P0060?
- It is generally not recommended to drive with a P0060 code as it can affect engine performance and emissions. It is advisable to address the issue promptly.
6. What is the typical repair process for resolving OBDII code P0060 on a 2006 Ford Fusion?
- The repair process often involves replacing the faulty HO2S sensor, repairing or replacing damaged wiring or connectors, and resetting the fault code.
7. Are there any DIY tips for fixing OBDII code P0060 on a 2006 Ford Fusion?
- While some may attempt to address wiring issues themselves, it is recommended to seek professional help for diagnosing and repairing the HO2S heater resistance fault.
8. How much does it cost to fix OBDII code P0060 on a 2006 Ford Fusion at a repair shop?
- The cost of repair can vary depending on the exact cause of the issue, but it typically ranges from $150 to $300 for parts and labor.
9. Will resetting the check engine light resolve OBDII code P0060 on a 2006 Ford Fusion?
- Resetting the check engine light may temporarily turn it off, but it will not fix the underlying issue causing the P0060 fault code.
10. Can a faulty HO2S heater affect the overall performance of a 2006 Ford Fusion?
- Yes, a faulty HO2S heater can impact engine performance, fuel efficiency, and emissions control on a 2006 Ford Fusion.
Discuss the causes and fixes for P0060 2006 Ford Fusion OBDII Code
Code P0060 2006 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
