P0060 2019 Ford F150 Code - HO2S Heater Resistance Bank 2 Sensor 2
Quick Answer
The HO2S detects the presence of oxygen in the exhaust and produces a variable voltage according to the amount of oxygen detected. Common causes include Faulty Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22), Heated Oxygen Sensor Bank 2 Sensor 2 circuit open shorted to ground, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0060 2019 Ford F150 indicates HO2S Heater Resistance Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22), Heated Oxygen Sensor Bank 2 Sensor 2 circuit open shorted to ground, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0060 2019 Ford F150 Description
When the oxygen sensor is cold, disconnected, or on initial start-up, the voltage may read between 1.5 to 1.7 volts. The oxygen sensor voltage will decrease to the normal operating range of 0.0 to 1.1 volts during warm, stabilized engine running conditions.
The HO2S heater is embedded with a sensing element. The heating element heats the sensor to a temperature of 800°C (1,472°F). At approximately 300°C (572°F) the engine enters closed loop operation. The heater allows the engine to enter closed loop operation sooner.
This Diagnostic Trouble Code (DTC) sets when the heater current requirements are too low or too high in the Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22) circuit.
What are the Possible Causes of the DTC P0060 2019 Ford F150?
- Faulty Heated Oxygen Sensor Bank 2 Sensor 2 (HO2S22)
- Heated Oxygen Sensor Bank 2 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
How to Fix the DTC P0060 2019 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0060 2019 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0060 2019 Ford F150 code?
Need more information on how to fix the P0060 2019 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0060 2019 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0060 2019 Ford F150 Code
1. What are the common symptoms of OBDII code P0060 in a 2019 Ford F150?
- Common symptoms include poor engine performance, decreased fuel efficiency, rough idling, and the illumination of the check engine light.
2. What does the OBDII code P0060 on a 2019 Ford F150 indicate?
- OBDII code P0060 for a 2019 Ford F150 refers to an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance on Bank 2 Sensor 2.
3. What are the possible causes of OBDII code P0060 in a 2019 Ford F150?
- Possible causes include a faulty HO2S sensor, damaged wiring or connectors, a blown fuse, or issues with the engine's computer (ECU).
4. How can I diagnose the OBDII code P0060 in my 2019 Ford F150?
- Diagnosing the code involves using an OBDII scanner to retrieve the specific fault code, checking the wiring and connectors for damage, and testing the HO2S sensor's resistance.
5. Can I continue driving my 2019 Ford F150 with OBDII code P0060?
- It is not recommended to continue driving with this code present, as it can lead to further damage to the vehicle and potentially worsen fuel efficiency.
6. How can I repair OBDII code P0060 on my 2019 Ford F150?
- Repair options include replacing the faulty HO2S sensor, repairing damaged wiring or connectors, checking and replacing any blown fuses, and resetting the ECU.
7. Are there any DIY tips for fixing OBDII code P0060 in a 2019 Ford F150?
- While some basic troubleshooting steps can be done by DIY enthusiasts, it is advisable to consult a professional mechanic for accurate diagnosis and repair of this code.
8. How much does it typically cost to fix OBDII code P0060 on a 2019 Ford F150?
- The cost of repairs can vary depending on the specific issue causing the code, but it may range from $100 to $300 for parts and labor.
9. What happens if OBDII code P0060 is ignored in a 2019 Ford F150?
- Ignoring this code can lead to reduced engine performance, poor fuel efficiency, and potential damage to other engine components over time.
10. Can a 2019 Ford F150 owner reset OBDII code P0060 without repairing the issue?
- While you can reset the code using an OBDII scanner, it is not recommended to do so without addressing the underlying problem, as the issue will likely reoccur.
Discuss the causes and fixes for P0060 2019 Ford F150 OBDII Code
Code P0060 2019 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
