P0060 2011 Ford Fusion Code - HO2S Heater Resistance Bank 2 Sensor 2
Quick Answer
The Heated Oxygen Sensor (HO2S) must reach the operating temperature to provide an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0060 2011 Ford Fusion indicates HO2S Heater Resistance Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0060 2011 Ford Fusion Description
What are the Possible Causes of the DTC P0060 2011 Ford Fusion?
- Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2
- Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted
- Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0060 2011 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0060 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0060 2011 Ford Fusion code?
Need more information on how to fix the P0060 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0060 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0060 2011 Ford Fusion Code
1. What are the common symptoms of OBDII code P0060 on a 2011 Ford Fusion?
The common symptoms of code P0060 (HO2S Heater Resistance Bank 2 Sensor 2) on a 2011 Ford Fusion may include rough idling, poor fuel economy, and the illumination of the Check Engine Light.
2. What does the OBDII code P0060 indicate for a 2011 Ford Fusion?
Code P0060 on a 2011 Ford Fusion indicates an issue with the heater circuit of the oxygen sensor located in bank 2, sensor 2 (rear sensor after the catalytic converter).
3. What are the possible causes of OBDII code P0060 on a 2011 Ford Fusion?
Common causes of code P0060 on a 2011 Ford Fusion include a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or issues with the vehicle's engine control module (ECM).
4. How can I diagnose OBDII code P0060 on my 2011 Ford Fusion?
To diagnose code P0060 on a 2011 Ford Fusion, you can use an OBDII scanner to retrieve the code and then visually inspect the oxygen sensor and its wiring for any visible damage. Testing the sensor's resistance and checking for voltage at the sensor connector are also recommended steps.
5. Can I drive my 2011 Ford Fusion with OBDII code P0060?
It is generally not recommended to drive your 2011 Ford Fusion with an unresolved OBDII code P0060, as it can lead to poor engine performance and potential damage to the catalytic converter over time. It is best to address the issue promptly.
6. How do I repair OBDII code P0060 on a 2011 Ford Fusion?
Repairing code P0060 on a 2011 Ford Fusion typically involves replacing the oxygen sensor in bank 2, sensor 2, if it is found to be faulty. Checking and repairing any damaged wiring or connectors, as well as ensuring the fuse related to the sensor is intact, are also part of the repair process.
7. Can a DIY enthusiast fix OBDII code P0060 on a 2011 Ford Fusion?
While some DIY enthusiasts may have the skills and tools to address code P0060 on a 2011 Ford Fusion by replacing the oxygen sensor and checking the wiring, it is recommended to consult a professional mechanic for proper diagnosis and repair.
8. What is the importance of the HO2S heater in the OBDII system of a 2011 Ford Fusion?
The heater in the heated oxygen sensor (HO2S) plays a crucial role in helping the sensor reach its operating temperature quickly. This ensures accurate readings and optimal engine performance while reducing emissions.
9. Will resetting the OBDII system clear code P0060 on a 2011 Ford Fusion?
Resetting the OBDII system may temporarily clear code P0060 on a 2011 Ford Fusion, but if the underlying issue causing the code is not addressed, it is likely to reappear once the system detects the problem again.
10. How can I prevent OBDII code P0060 from recurring on my 2011 Ford Fusion?
To prevent code P0060 from recurring on your 2011 Ford Fusion, it is essential to perform regular maintenance checks on the oxygen sensors, ensure proper wiring connections, and address any engine performance issues promptly to avoid potential sensor damage.
Discuss the causes and fixes for P0060 2011 Ford Fusion OBDII Code
Code P0060 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
