P0060 2008 Ford Fusion Code - HO2S Heater Resistance Bank 2 Sensor 2
Quick Answer
The Heated Oxygen Sensor (HO2S) must reach the operating temperature to provide an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0060 2008 Ford Fusion indicates HO2S Heater Resistance Bank 2 Sensor 2.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0060 2008 Ford Fusion Description
What are the Possible Causes of the DTC P0060 2008 Ford Fusion?
- Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2
- Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted
- Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0060 2008 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0060 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0060 2008 Ford Fusion code?
Need more information on how to fix the P0060 2008 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0060 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0060 2008 Ford Fusion Code
1. What does OBDII code P0060 on a 2008 Ford Fusion mean?
The code P0060 for a 2008 Ford Fusion indicates an issue with the HO2S (Heated Oxygen Sensor) Heater Resistance for Bank 2 Sensor 2.
2. What are the common symptoms of OBDII code P0060 on a 2008 Ford Fusion?
Common symptoms of code P0060 may include poor fuel economy, rough idling, engine misfires, and the illumination of the Check Engine Light.
3. What can cause the OBDII code P0060 on a 2008 Ford Fusion?
The code P0060 is typically triggered by a faulty HO2S sensor, damaged wiring or connectors, a blown fuse, or issues with the engine control module (ECM).
4. How can I diagnose the HO2S Heater Resistance issue for Bank 2 Sensor 2 on my 2008 Ford Fusion?
Diagnosing the P0060 code may involve checking the HO2S sensor, inspecting the wiring for damage, testing the heater circuit, and scanning the ECM for related faults.
5. How can I repair the HO2S Heater Resistance Bank 2 Sensor 2 on a 2008 Ford Fusion?
Repairing the P0060 code may require replacing the faulty HO2S sensor, repairing damaged wiring or connectors, replacing blown fuses, or reprogramming the ECM.
6. Is it safe to continue driving my 2008 Ford Fusion with the P0060 code?
It is not recommended to continue driving with the P0060 code as it can lead to poor engine performance and potential damage to other components over time.
7. Can I reset the Check Engine Light after fixing the HO2S Heater Resistance issue on my 2008 Ford Fusion?
After repairing the P0060 code, you can reset the Check Engine Light using an OBDII scanner to clear the stored fault codes in the ECM.
8. How much does it cost to repair the HO2S Heater Resistance Bank 2 Sensor 2 on a 2008 Ford Fusion?
The cost of repairing the P0060 code can vary depending on the cause of the issue, with expenses ranging from $100 to $300 for parts and labor.
9. How often should I replace the HO2S sensors on my 2008 Ford Fusion to prevent issues like code P0060?
HO2S sensors typically last around 60,000 to 100,000 miles, so it is recommended to replace them as part of regular maintenance to avoid sensor-related problems.
10. Can a DIY enthusiast fix the HO2S Heater Resistance Bank 2 Sensor 2 issue on a 2008 Ford Fusion?
While some aspects of diagnosing and repairing the P0060 code can be done by DIY enthusiasts, certain tasks, such as reprogramming the ECM, may require professional assistance.
Discuss the causes and fixes for P0060 2008 Ford Fusion OBDII Code
Code P0060 2008 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
