AutoCodes – Ford – P0060 2007 Ford Fusion

P0060 2007 Ford Fusion Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

The Heated Oxygen Sensor (HO2S) must reach the operating temperature to provide an accurate voltage signal. Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0060 2007 Ford Fusion indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,107

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 13, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 2007 Ford Fusion Description

The Heated Oxygen Sensor (HO2S) must reach the operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensor to reach operating temperature. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Powertrain Control Module (PCM). The PCM commands the heater ON or OFF to maintain a specific HO2S operating temperature range. The PCM determines the temperature by measuring the current flow through the heater. When the heater is in the ON state, the PCM will pulse the heater OFF for 50 ms, once per second. The PCM calculates the heater resistance on a cold start. The Diagnostic Trouble Code (DTC) will set if the heater current requirements too low or high in the HO2S heater control circuit.

OBDII Code P0060 2007 Ford Fusion - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 2007 Ford Fusion Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 2007 Ford Fusion?

Faulty Heated Oxygen Sensor (HO2S) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open or shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0060 2007 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 2007 Ford Fusion code?

Need more information on how to fix the P0060 2007 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 2007 Ford Fusion Code

1. What are the common symptoms of OBDII code P0060 on a 2007 Ford Fusion?

- Common symptoms include illuminated Check Engine light, poor fuel economy, rough idling, and potential engine misfires.

2. What does the code P0060 indicating HO2S Heater Resistance Bank 2 Sensor 2 mean for a 2007 Ford Fusion?

- This code indicates a malfunction in the heated oxygen sensor (HO2S) heater circuit of the second oxygen sensor on the second bank of the engine.

3. What are the possible causes of OBDII code P0060 on a 2007 Ford Fusion?

- Possible causes include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, a blown fuse, or a problem with the engine control module (ECM).

4. How can I diagnose and repair OBDII code P0060 on my 2007 Ford Fusion?

- Diagnostic steps involve checking the sensor's wiring and connectors for damage, testing the sensor's resistance, inspecting the fuse, and verifying the ECM's functionality. Repair may involve replacing the oxygen sensor or repairing the wiring.

5. Can I drive my 2007 Ford Fusion with an OBDII code P0060?

- It is not recommended to drive with this code for an extended period as it can lead to engine performance issues and potential damage. It is advisable to address the underlying problem promptly.

6. How much does it typically cost to repair OBDII code P0060 on a 2007 Ford Fusion?

- The cost of repairs for this code can vary based on the specific issue, but it may range from $100 to $300 for parts and labor.

7. Are there any DIY tips for troubleshooting OBDII code P0060 on a 2007 Ford Fusion?

- DIY enthusiasts can start by checking the sensor's wiring and connectors for damage, testing the sensor's resistance using a multimeter, and inspecting the fuse related to the sensor heater circuit.

8. How long does it usually take to repair OBDII code P0060 on a 2007 Ford Fusion?

- The repair time can vary depending on the exact cause of the issue and the expertise of the person performing the repair. In general, it may take anywhere from 1 to 3 hours.

9. Can a faulty O2 sensor cause OBDII code P0060 on a 2007 Ford Fusion?

- Yes, a faulty oxygen sensor, specifically the HO2S on bank 2 sensor 2, can trigger code P0060 due to issues with its heater circuit.

10. Will OBDII code P0060 on a 2007 Ford Fusion affect the vehicle's emissions?

- Yes, code P0060 can affect the vehicle's emissions since it indicates a problem with the oxygen sensor's heater circuit, which can impact the accuracy of the sensor readings and emission control system.