AutoCodes – Generic – P0060

P0060 Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0060 indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 24,788

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 23, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects the HO2S heater is not within a specified resistance range at engine start-up.

OBDII Code P0060 - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0060?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 code?

Need more information on how to fix the P0060 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

P0060 Buick — HO2S Heater Resistance Bank 2 Sensor 2
P0060 Cadillac — HO2S Heater Resistance Bank 2 Sensor 2
P0060 Chevrolet — HO2S Heater Resistance Bank 2 Sensor 2
P0060 Ford — HO2S Heater Resistance Bank 2 Sensor 2
P0060 GMC — HO2S Heater Resistance Bank 2 Sensor 2
P0060 Hummer — HO2S Heater Resistance Bank 2 Sensor 2
P0060 Lincoln — HO2S Heater Resistance Bank 2 Sensor 2
P0060 Mazda — HO2S22 Heater Control Circuit Fault
P0060 Mercury — HO2S Heater Resistance Bank 2 Sensor 2
P0060 Oldsmobile — HO2S Heater Resistance Bank 2 Sensor 2
P0060 Pontiac — HO2S Heater Resistance Bank 2 Sensor 2
P0060 Saturn — HO2S Heater Resistance Bank 2 Sensor 2
P0060 Suzuki — HO2S22 Heater Control Circuit Low/High/Heater Resistance

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 Code

1. What are common symptoms of OBDII code P0060 related to HO2S Heater Resistance Bank 2 Sensor 2?

- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and the illumination of the Check Engine light.

2. What are the possible causes of OBDII code P0060 for HO2S Heater Resistance Bank 2 Sensor 2?

- The code may be triggered by a faulty oxygen sensor, damaged wiring or connectors, a blown fuse, or issues with the vehicle's engine control module (ECM).

3. How can I diagnose OBDII code P0060 for HO2S Heater Resistance Bank 2 Sensor 2?

- Diagnosing the code typically involves using an OBDII scanner to read the code, checking the oxygen sensor's wiring and connectors, and testing the sensor's resistance with a multimeter.

4. What should I check first when troubleshooting OBDII code P0060 for HO2S Heater Resistance Bank 2 Sensor 2?

- Start by inspecting the wiring and connectors of the oxygen sensor, ensuring they are intact and properly connected. Also, check for any blown fuses that may be affecting the sensor's heater circuit.

5. Can I drive my vehicle with OBDII code P0060 related to HO2S Heater Resistance Bank 2 Sensor 2?

- It is generally not recommended to drive your vehicle with this code present, as it can lead to further damage and decreased fuel efficiency. It is best to address the issue promptly.

6. How do I repair OBDII code P0060 for HO2S Heater Resistance Bank 2 Sensor 2?

- Repairing the code often involves replacing the faulty oxygen sensor, repairing any damaged wiring or connectors, and ensuring the sensor's heater circuit is functioning correctly.

7. Are there any DIY tips for fixing OBDII code P0060 for HO2S Heater Resistance Bank 2 Sensor 2?

- DIY tips include checking and cleaning the sensor's connectors, inspecting the wiring for any visible damage, and following the vehicle's repair manual for specific repair procedures.

8. How much does it cost to fix OBDII code P0060 for HO2S Heater Resistance Bank 2 Sensor 2?

- The cost of fixing this code can vary depending on the cause of the issue, the labor rates in your area, and whether you choose to do the repairs yourself or take your vehicle to a mechanic.

9. Can a faulty oxygen sensor cause OBDII code P0060 for HO2S Heater Resistance Bank 2 Sensor 2?

- Yes, a faulty oxygen sensor can trigger this code if its heater circuit is not functioning properly. It is one of the common causes of the P0060 code.

10. How long does it take to repair OBDII code P0060 for HO2S Heater Resistance Bank 2 Sensor 2?

- The repair time can vary depending on the extent of the issue and your level of experience. It may take anywhere from 1-3 hours for a mechanic to diagnose and repair the problem.