AutoCodes – GMC – P0060 GMC

P0060 GMC Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0060 GMC indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,762

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 23, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 GMC Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects the HO2S heater is not within a specified resistance range at engine start-up.

OBDII Code P0060 GMC - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 GMC Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 GMC?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0060 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 GMC code?

Need more information on how to fix the P0060 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 GMC code diagnosed by a professional: Find a repair shop in your area

Information for Specific GMC Models

P0060 2014 GMC Sierra — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2015 GMC Sierra — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2016 GMC Sierra — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2017 GMC Sierra — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2018 GMC Sierra — HO2S Heater Resistance Bank 2 Sensor 2

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 GMC Code

1. What are common symptoms of OBDII code P0060 GMC (HO2S Heater Resistance Bank 2 Sensor 2)?

- Common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and the illumination of the Check Engine Light.

2. What does OBDII code P0060 GMC indicate specifically?

- This code indicates an issue with the heater circuit of the oxygen sensor located in bank 2, sensor 2 of the vehicle.

3. What are potential causes of OBDII code P0060 GMC?

- Potential causes include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, a blown fuse, or a problem with the engine control module (ECM).

4. How can I diagnose the cause of OBDII code P0060 GMC?

- Diagnosing this code typically involves using a scan tool to retrieve the specific fault code, checking the sensor's wiring and connectors for damage, and testing the sensor's resistance.

5. Can I drive my vehicle with OBDII code P0060 GMC present?

- It is generally safe to drive the vehicle with this code, but it is recommended to address the issue promptly to prevent further damage and ensure optimal engine performance.

6. How can I repair OBDII code P0060 GMC?

- Repair options may include replacing the oxygen sensor in bank 2, sensor 2, repairing damaged wiring or connectors, checking and replacing fuses if necessary, or resetting the ECM.

7. Is it possible to clear OBDII code P0060 GMC without fixing the underlying issue?

- While clearing the code may temporarily turn off the Check Engine Light, the issue causing the code will persist until properly addressed, potentially leading to more severe problems over time.

8. Can a DIY enthusiast fix OBDII code P0060 GMC, or is professional assistance recommended?

- Depending on your skill level and access to tools, DIY repair may be possible for this code. However, if you are unsure or uncomfortable with the diagnostic and repair process, seeking professional assistance is advisable.

9. How much does it typically cost to repair OBDII code P0060 GMC at a mechanic or dealership?

- The cost of repairing this code can vary depending on the specific cause and the labor rates of the repair facility. It is recommended to obtain quotes from multiple sources for an accurate estimate.

10. Are there any preventive measures to avoid encountering OBDII code P0060 GMC in the future?

- Regular maintenance, such as checking and replacing oxygen sensors at recommended intervals, inspecting wiring harnesses for damage, and addressing any engine performance issues promptly, can help prevent this code from appearing.