AutoCodes – Chevrolet – P0060 Chevrolet

P0060 Chevrolet Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0060 Chevrolet indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 11,174

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 23, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 Chevrolet Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects the HO2S heater is not within a specified resistance range at engine start-up.

OBDII Code P0060 Chevrolet - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 Chevrolet Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 Chevrolet?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0060 Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 Chevrolet code?

Need more information on how to fix the P0060 Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 Chevrolet code diagnosed by a professional: Find a repair shop in your area

Information for Specific Chevrolet Models

P0060 2014 Chevrolet Silverado — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2015 Chevrolet Silverado — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2016 Chevrolet Silverado — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2017 Chevrolet Silverado — HO2S Heater Resistance Bank 2 Sensor 2
P0060 2018 Chevrolet Silverado — HO2S Heater Resistance Bank 2 Sensor 2

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 Chevrolet Code

1. What does OBDII code P0060 for a Chevrolet indicate?

- OBDII code P0060 for a Chevrolet refers to a fault with the HO2S (Heated Oxygen Sensor) Heater Resistance Bank 2 Sensor 2.

2. What are common symptoms of OBDII code P0060 on a Chevrolet?

- Common symptoms of OBDII code P0060 on a Chevrolet may include rough idling, decreased fuel efficiency, and an illuminated check engine light.

3. What causes OBDII code P0060 on a Chevrolet?

- The most common causes of OBDII code P0060 on a Chevrolet are a faulty HO2S Heater Bank 2 Sensor 2, damaged wiring or connectors, or a blown fuse related to the sensor.

4. How can I diagnose OBDII code P0060 on my Chevrolet?

- To diagnose OBDII code P0060 on your Chevrolet, you can use an OBDII scanner to retrieve the code, inspect the sensor and its wiring for any visible damage, and test the sensor's resistance with a multimeter.

5. Can I still drive my Chevrolet with OBDII code P0060 present?

- It is generally not recommended to drive your Chevrolet with OBDII code P0060 present, as it can lead to decreased engine performance and potential damage to the catalytic converter.

6. How do I repair OBDII code P0060 on a Chevrolet?

- To repair OBDII code P0060 on a Chevrolet, you may need to replace the HO2S Heater Bank 2 Sensor 2, repair any damaged wiring or connectors, and reset the fault code with an OBDII scanner.

7. Are there any DIY tips for fixing OBDII code P0060 on a Chevrolet?

- DIY tips for fixing OBDII code P0060 on a Chevrolet include checking the sensor's fuse, inspecting and cleaning the connectors, and ensuring proper installation of the new sensor.

8. What are the consequences of ignoring OBDII code P0060 on a Chevrolet?

- Ignoring OBDII code P0060 on a Chevrolet can lead to poor engine performance, increased emissions, potential damage to the catalytic converter, and the risk of failing an emissions test.

9. Is it necessary to reset the OBDII code P0060 after repairs on a Chevrolet?

- Yes, it is important to reset the OBDII code P0060 after making repairs on a Chevrolet to clear the fault code and ensure the issue has been properly addressed.

10. Can weather conditions affect OBDII code P0060 on a Chevrolet?

- Extreme weather conditions such as excessive cold or heat can potentially affect the operation of the HO2S Heater Bank 2 Sensor 2, leading to the triggering of OBDII code P0060 on a Chevrolet.