AutoCodes – Generic – B2767

B2767 Code - Left Impact Pressure Sensor

Quick Answer

The left side impact pressure sensor is located in the first row door. Common causes include Faulty Left Impact Pressure Sensor, Left Impact Pressure Sensor harness is open or shorted, Left Impact Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B2767 indicates Left Impact Pressure Sensor.
Common causes: Common causes include Faulty Left Impact Pressure Sensor, Left Impact Pressure Sensor harness is open or shorted, Left Impact Pressure Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,886

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jan 27, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B2767 Description

The left side impact pressure sensor is located in the first row door. The impact pressure sensor performs its own self test using power supplied by the Occupant Restraint Controller (ORC) then communicate this status back to the ORC with periodic updates. The repair of this fault condition involves verifying the integrity of the wiring between the ORC and the sensor. The ORC continuously communicates with the Left Side Impact Pressure Sensor over the sensor signal circuit. The sensor communication and on board diagnostics are powered by the ORC signal.
This code will set, if the ORC and the Left Side Impact Pressure Sensor do not establish and maintain valid data communications. The Diagnostic Trouble Code (DTC) will become Active after the fault has set for nine seconds. The DTC will go to Stored after the ORC to Left Side Impact Pressure Sensor communication has recovered for 4 seconds.

OBDII Code B2767 - Left Impact Pressure Sensor - AutoCodes.com — B2767 Code - Left Impact Pressure Sensor

What does this mean?

What are the Possible Causes of the DTC B2767?

Faulty Left Impact Pressure Sensor
Left Impact Pressure Sensor harness is open or shorted
Left Impact Pressure Sensor circuit poor electrical connection
Faulty Occupant Restraint Controller (ORC)

How to Fix the DTC B2767?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B2767 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B2767 code?

Need more information on how to fix the B2767 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B2767 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B2767 Chrysler — Left Impact Pressure Sensor
B2767 Dodge — Left Impact Pressure Sensor
B2767 Jeep — Left Impact Pressure Sensor
B2767 RAM — Left Impact Pressure Sensor

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B2767 Code

1. What are the common symptoms of OBDII code B2767 (Left Impact Pressure Sensor)?

The common symptoms of OBDII code B2767 include issues with the airbag system, the airbag warning light being illuminated on the dashboard, and potential airbag deployment problems.

2. What are the possible causes of OBDII code B2767?

The possible causes of OBDII code B2767 (Left Impact Pressure Sensor) can include a faulty left impact pressure sensor, wiring issues, or a problem with the airbag control module.

3. How serious is OBDII code B2767?

OBDII code B2767 is a serious issue as it relates to the left impact pressure sensor, which is a critical component of the airbag system. It is important to address this code promptly to ensure the proper functioning of the airbag in the event of a collision.

4. Can I continue driving with OBDII code B2767 present?

It is not recommended to continue driving with OBDII code B2767 (Left Impact Pressure Sensor) present, as it indicates a potential problem with the airbag system. Driving with a faulty airbag system can compromise your safety in the event of an accident.

5. How can OBDII code B2767 be diagnosed?

OBDII code B2767 can be diagnosed using a professional OBDII scanner that can read and interpret the specific fault codes related to the left impact pressure sensor. Additionally, a thorough inspection of the airbag system components may be necessary.

6. What are the repair options for OBDII code B2767?

Repair options for OBDII code B2767 may include replacing the faulty left impact pressure sensor, repairing any damaged wiring, or addressing issues with the airbag control module. It is recommended to consult a qualified mechanic for proper diagnosis and repair.

7. Is it possible to reset OBDII code B2767 without fixing the underlying issue?

While it is possible to clear the OBDII code B2767 from the system temporarily, the underlying issue with the left impact pressure sensor will still remain unresolved. It is essential to address the root cause of the problem to ensure the proper functioning of the airbag system.

8. Can weather conditions affect OBDII code B2767?

Extreme weather conditions such as excessive heat or moisture can potentially impact the performance of the left impact pressure sensor, leading to the triggering of OBDII code B2767. It is important to maintain the airbag system components in proper working condition.

9. Are there any safety precautions to take when dealing with OBDII code B2767?

When dealing with OBDII code B2767, it is important to observe safety precautions such as disconnecting the vehicle's battery before working on the airbag system to avoid accidental deployment. It is also recommended to consult a professional for proper diagnosis and repair.

10. How much does it cost to fix OBDII code B2767?

The cost of fixing OBDII code B2767 (Left Impact Pressure Sensor) can vary depending on the underlying issue, the extent of the damage, and the labor rates of the repair shop. It is recommended to obtain a detailed estimate from a qualified mechanic before proceeding with the repair.