B2767 RAM Code - Left Impact Pressure Sensor
Quick Answer
The left side impact pressure sensor is located in the first row door. Common causes include Faulty Left Impact Pressure Sensor, Left Impact Pressure Sensor harness is open or shorted, Left Impact Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2767 RAM indicates Left Impact Pressure Sensor.
- Common causes
- Common causes include Faulty Left Impact Pressure Sensor, Left Impact Pressure Sensor harness is open or shorted, Left Impact Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2767 RAM Description
This code will set, if the ORC and the Left Side Impact Pressure Sensor do not establish and maintain valid data communications. The Diagnostic Trouble Code (DTC) will become Active after the fault has set for nine seconds. The DTC will go to Stored after the ORC to Left Side Impact Pressure Sensor communication has recovered for 4 seconds.
What are the Possible Causes of the DTC B2767 RAM?
- Faulty Left Impact Pressure Sensor
- Left Impact Pressure Sensor harness is open or shorted
- Left Impact Pressure Sensor circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B2767 RAM?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2767 RAM code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2767 RAM code?
Need more information on how to fix the B2767 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2767 RAM code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2767 RAM Code
1. What does the OBDII code B2767 RAM mean?
The B2767 code indicates an issue with the Left Impact Pressure Sensor, which is part of the vehicle's airbag system designed to detect side-impact collisions.
2. What are the common symptoms of the B2767 code?
Symptoms may include the airbag warning light illuminating, a malfunctioning side airbag system, or no visible symptoms in some cases.
3. What causes the B2767 RAM code to trigger?
Common causes include a faulty Left Impact Pressure Sensor, damaged wiring or connectors, or a malfunction in the airbag control module.
4. Is it safe to drive with the B2767 code active?
Driving may be safe under normal conditions, but the airbag system may not function properly in a collision, posing a safety risk.
5. How do I diagnose the B2767 code?
Diagnose the code by scanning the vehicle with an OBDII tool, inspecting the Left Impact Pressure Sensor and its wiring, and checking the airbag system for additional fault codes.
6. Can I fix the B2767 RAM code myself?
If you're experienced with automotive repairs, you can inspect and replace the sensor or repair damaged wiring. However, airbag systems are sensitive, and professional assistance is recommended.
7. How much does it cost to repair the B2767 RAM code?
Repair costs can vary but typically range from $100 to $400, depending on whether the sensor, wiring, or airbag module needs replacement.
8. Does the B2767 code always mean the sensor is faulty?
No, the issue could also be with the wiring, connectors, or airbag control module, so a thorough diagnosis is essential.
9. Will clearing the B2767 code fix the problem?
Clearing the code may temporarily turn off the warning light, but the issue must be resolved to prevent the code from returning.
10. Can a dead battery cause the B2767 code?
A dead or weak battery can sometimes cause electrical issues, including triggering airbag-related codes, but it’s not a common cause for this specific code.
Discuss the causes and fixes for B2767 RAM OBDII Code
Code B2767 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
