B2767 Dodge Code - Left Impact Pressure Sensor
Quick Answer
The left side impact pressure sensor is located in the first row door. Common causes include Faulty Left Impact Pressure Sensor, Left Impact Pressure Sensor harness is open or shorted, Left Impact Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2767 Dodge indicates Left Impact Pressure Sensor.
- Common causes
- Common causes include Faulty Left Impact Pressure Sensor, Left Impact Pressure Sensor harness is open or shorted, Left Impact Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2767 Dodge Description
This code will set, if the ORC and the Left Side Impact Pressure Sensor do not establish and maintain valid data communications. The Diagnostic Trouble Code (DTC) will become Active after the fault has set for nine seconds. The DTC will go to Stored after the ORC to Left Side Impact Pressure Sensor communication has recovered for 4 seconds.
What are the Possible Causes of the DTC B2767 Dodge?
- Faulty Left Impact Pressure Sensor
- Left Impact Pressure Sensor harness is open or shorted
- Left Impact Pressure Sensor circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B2767 Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2767 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2767 Dodge code?
Need more information on how to fix the B2767 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2767 Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2767 Dodge Code
1. What does the OBDII code B2767 mean for a Dodge vehicle?
The B2767 code indicates a fault with the Left Impact Pressure Sensor, which is part of the vehicle's airbag system.
2. What are the symptoms of a B2767 code on a Dodge?
Common symptoms include the airbag warning light illuminating, a stored fault code in the airbag control module, and potential deactivation of the airbag system.
3. What causes the B2767 code to appear?
The code can be triggered by a faulty Left Impact Pressure Sensor, damaged wiring or connectors, or a malfunction in the airbag control module.
4. Is it safe to drive with a B2767 code?
No, it is not safe, as the airbag system may not deploy correctly in the event of a collision, compromising vehicle safety.
5. How can I diagnose the B2767 code on my Dodge?
Use an OBDII scanner to confirm the code, then inspect the wiring, connectors, and Left Impact Pressure Sensor for damage or corrosion.
6. How do I fix the B2767 code on a Dodge?
Repairs may include replacing the Left Impact Pressure Sensor, repairing damaged wiring, or reprogramming the airbag control module if necessary.
7. Can a B2767 code clear itself?
No, the code will typically remain until the underlying issue is resolved and the system is reset using a diagnostic scanner.
8. How much does it cost to fix a B2767 code on a Dodge?
Repair costs vary but can range from $100 to $500, depending on whether the sensor, wiring, or control module needs replacement.
9. Can a faulty Left Impact Pressure Sensor cause other issues?
Yes, it can prevent the airbag system from functioning correctly, increasing the risk of injury in a collision.
10. Do I need professional help to fix a B2767 code?
While some basic diagnostics can be done at home, it's recommended to seek professional help to ensure the airbag system is repaired and calibrated correctly.
Discuss the causes and fixes for B2767 Dodge OBDII Code
Code B2767 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
