B2767 Chrysler Code - Left Impact Pressure Sensor
Quick Answer
The left side impact pressure sensor is located in the first row door. Common causes include Faulty Left Impact Pressure Sensor, Left Impact Pressure Sensor harness is open or shorted, Left Impact Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B2767 Chrysler indicates Left Impact Pressure Sensor.
- Common causes
- Common causes include Faulty Left Impact Pressure Sensor, Left Impact Pressure Sensor harness is open or shorted, Left Impact Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B2767 Chrysler Description
This code will set, if the ORC and the Left Side Impact Pressure Sensor do not establish and maintain valid data communications. The Diagnostic Trouble Code (DTC) will become Active after the fault has set for nine seconds. The DTC will go to Stored after the ORC to Left Side Impact Pressure Sensor communication has recovered for 4 seconds.
What are the Possible Causes of the DTC B2767 Chrysler?
- Faulty Left Impact Pressure Sensor
- Left Impact Pressure Sensor harness is open or shorted
- Left Impact Pressure Sensor circuit poor electrical connection
- Faulty Occupant Restraint Controller (ORC)
How to Fix the DTC B2767 Chrysler?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B2767 Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B2767 Chrysler code?
Need more information on how to fix the B2767 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B2767 Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B2767 Chrysler Code
1. What does the OBDII code B2767 mean in a Chrysler vehicle?
The code B2767 indicates an issue with the Left Impact Pressure Sensor, which is part of the vehicle's airbag system responsible for detecting side impacts.
2. What are the symptoms of a B2767 code in a Chrysler?
Common symptoms include an illuminated airbag warning light, the airbag system being disabled, or no noticeable symptoms until the vehicle is scanned for codes.
3. What causes the B2767 code to appear?
Causes can include a faulty Left Impact Pressure Sensor, damaged wiring or connectors, corrosion in the sensor circuit, or a malfunction in the airbag control module.
4. Can I drive my Chrysler with the B2767 code active?
It is not recommended to drive with this code active, as the airbag system may not deploy correctly in the event of an accident, compromising safety.
5. How do I diagnose the B2767 code in a Chrysler?
Diagnosis involves scanning for codes, inspecting the Left Impact Pressure Sensor, checking the wiring and connectors for damage or corrosion, and testing the airbag control module if needed.
6. How can the B2767 code be fixed?
Repairs may include replacing the Left Impact Pressure Sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the airbag control module.
7. How much does it cost to repair the B2767 code in a Chrysler?
Repair costs vary but typically range from $100 to $500, depending on whether the sensor, wiring, or airbag module needs repair or replacement.
8. Can I reset the B2767 code without fixing the problem?
Resetting the code without addressing the cause is not recommended, as the issue will likely return and the airbag system may remain compromised.
9. Is the B2767 code specific to Chrysler vehicles?
While the code itself can appear in other brands, its definition and application to the Left Impact Pressure Sensor are specific to Chrysler vehicles.
10. What tools are needed to troubleshoot the B2767 code?
You’ll need an OBDII scanner capable of reading airbag system codes, a multimeter for testing electrical circuits, and possibly factory repair manuals for detailed wiring diagrams.
Discuss the causes and fixes for B2767 Chrysler OBDII Code
Code B2767 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
