P2808 - Pressure Control Solenoid 'G' Performance/Stuck Off

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

P2808 Possible Causes

  • Faulty Pressure Control Solenoid 'G'
  • Pressure Control Solenoid 'G' harness is open or shorted
  • Pressure Control Solenoid 'G' circuit poor electrical connection
  • Blockage in Transmission Valve Body

First diagnose P2808 code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

Cost of diagnosing the P2808 code

    Labor: 1.0

    The cost of diagnosing the P2808 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

P2808 Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P2808 Description

The Transmission Control Module (TCM) uses the vehicle speed signal to determine the actual gear position (1st, 2nd, 3rd, 4th. 5th or 6th gear). Then the TCM compares the actual gear with the shift schedule in the TCM memory to detect shift solenoid valves and valve body mechanical problems.
OBDII Code P2808 - Pressure Control Solenoid 'G' Performance/Stuck Off - AutoCodes.com

P2808 More Information

Need more information on how to fix the P2808 code?
Get Access to Factory Service Manuals

P2808 Information for specific makes

  • P2808 TOYOTA Pressure Control Solenoid 'G' Performance/Stuck Off Valve SL4   

Need more help?

Get the P2808 code diagnosed by a professional: Find a repair shop in your area

Related Information

P2808 Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the P2808 code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧