P2808 GMC Code - Transmission Control Solenoid Valve 7 Stuck Off
Quick Answer
The Transmission Control Module (TCM) uses the vehicle speed signal to determine the actual gear position (1st, 2nd, 3rd, 4th. Common causes include Faulty Transfer Case Shift Control Switch, Transfer Case Shift Control Switch harness is open or shorted, Transfer Case Shift Control Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2808 GMC indicates Transmission Control Solenoid Valve 7 Stuck Off.
- Common causes
- Common causes include Faulty Transfer Case Shift Control Switch, Transfer Case Shift Control Switch harness is open or shorted, Transfer Case Shift Control Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2808 GMC Description
What are the Possible Causes of the DTC P2808 GMC?
- Faulty Transfer Case Shift Control Switch
- Transfer Case Shift Control Switch harness is open or shorted
- Transfer Case Shift Control Switch circuit poor electrical connection
How to Fix the DTC P2808 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2808 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2808 GMC code?
Need more information on how to fix the P2808 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2808 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P2808 2014 GMC Sierra — Transmission Control Solenoid Valve 7 Stuck Off
- P2808 2015 GMC Sierra — Transmission Control Solenoid Valve 7 Stuck Off
- P2808 2016 GMC Sierra — Transmission Control Solenoid Valve 7 Stuck Off
- P2808 2017 GMC Sierra — Transmission Control Solenoid Valve 7 Stuck Off
- P2808 2018 GMC Sierra — Transmission Control Solenoid Valve 7 Stuck Off
Frequently Asked Questions about P2808 GMC Code
What does the OBD-II code P2808 mean in a GMC vehicle?
The P2808 code indicates that Transmission Control Solenoid Valve 7 is stuck in the "off" position, which can affect gear shifting and transmission performance.
What are the common symptoms of the P2808 code?
Symptoms include difficulty shifting gears, transmission slipping, poor acceleration, and the Check Engine Light being illuminated.
What causes the P2808 code to appear?
Common causes include a faulty transmission control solenoid, dirty or contaminated transmission fluid, wiring issues, or internal transmission problems.
Can driving with the P2808 code cause damage to my GMC?
Yes, continuing to drive with this code can lead to further transmission damage and higher repair costs if not addressed promptly.
How do I diagnose the P2808 code in my GMC?
Diagnosis typically involves scanning for codes, inspecting the transmission wiring and connectors, checking the transmission fluid condition, and testing the solenoid's functionality.
What is the role of the transmission control solenoid in my GMC?
The transmission control solenoid regulates the flow of transmission fluid to control gear changes based on driving conditions.
How can I fix the P2808 code in my GMC?
Repairs may include replacing the faulty solenoid, cleaning or replacing dirty transmission fluid, repairing damaged wiring, or addressing internal transmission issues.
How much does it cost to repair the P2808 code?
Repair costs vary but typically range from $150 to $400 for solenoid replacement, plus additional costs if other transmission repairs are needed.
Can I clear the P2808 code without fixing the problem?
Clearing the code without addressing the cause may temporarily turn off the Check Engine Light, but the issue will likely return and could worsen over time.
Do I need a professional to fix the P2808 code in my GMC?
While some issues like replacing transmission fluid are manageable for DIYers, more complex tasks like solenoid replacement or internal transmission repairs often require a professional mechanic.
Discuss the causes and fixes for P2808 GMC OBDII Code
Code P2808 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
