P2808 Buick Code - Transmission Control Solenoid Valve 7 Stuck Off
Quick Answer
The Transmission Control Module (TCM) uses the vehicle speed signal to determine the actual gear position (1st, 2nd, 3rd, 4th. Common causes include Faulty Transfer Case Shift Control Switch, Transfer Case Shift Control Switch harness is open or shorted, Transfer Case Shift Control Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P2808 Buick indicates Transmission Control Solenoid Valve 7 Stuck Off.
- Common causes
- Common causes include Faulty Transfer Case Shift Control Switch, Transfer Case Shift Control Switch harness is open or shorted, Transfer Case Shift Control Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P2808 Buick Description
What are the Possible Causes of the DTC P2808 Buick?
- Faulty Transfer Case Shift Control Switch
- Transfer Case Shift Control Switch harness is open or shorted
- Transfer Case Shift Control Switch circuit poor electrical connection
How to Fix the DTC P2808 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P2808 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P2808 Buick code?
Need more information on how to fix the P2808 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P2808 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P2808 Buick Code
What does the OBDII code P2808 mean for a Buick?
P2808 indicates that the Transmission Control Module (TCM) has detected that solenoid valve 7 in the transmission is stuck in the "off" position, impacting gear shifting.
What are the common symptoms of code P2808 in a Buick?
Symptoms may include harsh or delayed shifting, the transmission stuck in one gear, decreased fuel efficiency, or the check engine light illuminating.
What causes the P2808 code in a Buick?
Possible causes include a faulty transmission control solenoid, clogged fluid passages, low or dirty transmission fluid, wiring issues, or a malfunctioning TCM.
Can driving with the P2808 code damage my Buick's transmission?
Yes, driving with this code active can cause additional wear on the transmission and lead to more severe damage if not addressed promptly.
How do I diagnose the P2808 code in my Buick?
Start by checking the transmission fluid level and condition, inspecting the wiring and connectors for damage, and testing the solenoid valve 7 circuit for continuity or faults.
How can I fix the P2808 code on my Buick?
Repairs may include replacing the faulty solenoid, cleaning or flushing the transmission fluid, repairing damaged wiring, or reprogramming or replacing the TCM if necessary.
What tools are required to fix the P2808 code on a Buick?
You may need an OBDII scanner, a multimeter for electrical testing, basic hand tools, and possibly a transmission fluid flush kit.
Is it expensive to repair the P2808 code on a Buick?
Repair costs depend on the exact cause, ranging from under $100 for a fluid change to several hundred dollars for solenoid or TCM replacement.
Can low transmission fluid trigger the P2808 code in a Buick?
Yes, low or dirty transmission fluid can prevent the solenoid from functioning properly, potentially triggering this code.
Should I reset the P2808 code after repairs on my Buick?
Yes, use an OBDII scanner to clear the code after completing repairs, but ensure the underlying issue is resolved to prevent the code from returning.
Discuss the causes and fixes for P2808 Buick OBDII Code
Code P2808 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
