P0111 Code - Intake Air Temperature Circuit Range/Performance Problem
Quick Answer
The Intake Air Temperature (IAT) sensor is built into Mass Air Flow (MAF) sensor. Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0111 indicates Intake Air Temperature Circuit Range/Performance Problem.
- Common causes
- Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0111 Description
What are the Possible Causes of the DTC P0111?
- Dirty Air Filter
- Faulty Intake Air Temperature (IAT) Sensor
- Intake Air Temperature Sensor harness is open or shorted
- Intake Air Temperature Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0111?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0111 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0111 code?
Need more information on how to fix the P0111 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0111 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P0111 Acura — Intake Air Temperature Sensor 1 Circuit Range/Performance Problem
- P0111 Audi — Intake Air Temperature Circuit Range/Performance Problem
- P0111 BMW — Intake Air Temperature Circuit Range/Performance Bank 1
- P0111 Buick — Intake Air Temperature Circuit Range/Performance Problem
- P0111 Cadillac — Intake Air Temperature Circuit Range/Performance Problem
- P0111 Chevrolet — Intake Air Temperature Circuit Range/Performance Problem
- P0111 Chrysler — Intake Air Temperature Sensor 1 Performance
- P0111 Dodge — Intake Air Temperature Sensor 1 Performance
- P0111 Ford — Intake Air Temperature Sensor 1 Circuit Range/Performance Problem
- P0111 GMC — Intake Air Temperature Circuit Range/Performance Problem
- P0111 Honda — Intake Air Temperature Sensor 1 Circuit Range/Performance Problem
- P0111 Hyundai — Intake Air Temperature Sensor 1 Circuit Range/Performance Problem
- P0111 Jaguar — Intake Air Temperature Circuit Range/Performance Problem
- P0111 Jeep — Intake Air Temperature Sensor 1 Performance
- P0111 Lexus — Intake Air Temperature Sensor Gradient Too High
- P0111 Lincoln — Intake Air Temperature Sensor 1 Circuit Range/Performance Problem
- P0111 Mazda — Intake Air Temperature Circuit Performance Problem
- P0111 Mercedes-Benz — Intake Air Temperature Circuit Range/Performance Problem
- P0111 Mercury — Intake Air Temperature Sensor 1 Circuit Range/Performance Problem
- P0111 MINI — Intake Air Temperature Circuit Range/Performance Bank 1
- P0111 Mitsubishi — Intake Air Temperature Circuit Range/Performance Problem
- P0111 Nissan — Intake Air Temperature Circuit Range/Performance Problem
- P0111 Subaru — Intake Air Temperature Circuit Range/Performance Problem
- P0111 Toyota — Intake Air Temperature Sensor Gradient Too High
- P0111 Volkswagen — Intake Air Temperature Circuit Range/Performance Problem
Frequently Asked Questions about P0111 Code
1. What are the common symptoms of OBDII code P0111?
The common symptoms of OBDII code P0111 include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.
2. What are the possible causes of the Intake Air Temperature Circuit Range/Performance Problem (P0111) code?
Possible causes of the P0111 code include a faulty intake air temperature sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).
3. How can I diagnose the cause of OBDII code P0111?
To diagnose the cause of P0111, start by checking the intake air temperature sensor for proper operation, inspecting the sensor's wiring and connectors for damage, and testing the ECM for any malfunctions using a diagnostic scanner.
4. Can a dirty air filter trigger OBDII code P0111?
Yes, a dirty air filter can affect the intake air temperature readings, potentially triggering the P0111 code. It is recommended to check and replace the air filter if necessary when troubleshooting this code.
5. Will driving with OBDII code P0111 cause further damage to my vehicle?
Continuing to drive with the P0111 code may lead to decreased engine performance and fuel efficiency. It is advised to address the issue promptly to prevent any potential long-term damage to the vehicle.
6. Is it safe to reset the OBDII code P0111 without fixing the underlying issue?
Resetting the P0111 code without fixing the underlying issue will only temporarily clear the error code. The issue causing the code will persist, and the code will likely reappear after driving cycles.
7. Can a DIY enthusiast repair OBDII code P0111 at home?
Depending on the cause of the P0111 code, DIY enthusiasts may be able to repair it at home by replacing the intake air temperature sensor, checking and repairing damaged wiring, or cleaning connectors. However, more complex issues may require professional assistance.
8. How much does it typically cost to repair OBDII code P0111 at a mechanic?
The cost to repair OBDII code P0111 at a mechanic can vary depending on the cause of the issue, the labor rates in your area, and the cost of any necessary parts. It is recommended to obtain quotes from different mechanics for an accurate estimate.
9. Are there any preventive measures to avoid triggering OBDII code P0111?
Regular maintenance, such as changing the air filter at recommended intervals, inspecting and cleaning the intake air temperature sensor, and ensuring proper wiring connections, can help prevent triggering the P0111 code.
10. How soon should I address OBDII code P0111 once it appears?
It is advisable to address OBDII code P0111 as soon as it appears to prevent potential engine performance issues and further damage. Ignoring the code can lead to more severe problems over time.
Discuss the causes and fixes for P0111 OBDII Code
Code P0111 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
