P0111 Mercedes-Benz Code - Intake Air Temperature Circuit Range/Performance Problem
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0111 Mercedes-Benz indicates Intake Air Temperature Circuit Range/Performance Problem.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0111 Mercedes-Benz Description
What are the Possible Causes of the DTC P0111 Mercedes-Benz?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0111 Mercedes-Benz?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0111 Mercedes-Benz code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0111 Mercedes-Benz code?
Need more information on how to fix the P0111 Mercedes-Benz code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0111 Mercedes-Benz code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0111 Mercedes-Benz Code
1. What are the common symptoms of OBDII code P0111 in a Mercedes-Benz?
The common symptoms of OBDII code P0111 in a Mercedes-Benz include poor engine performance, reduced fuel efficiency, rough idling, and potential stalling.
2. What does the OBDII code P0111 indicate in a Mercedes-Benz?
OBDII code P0111 in a Mercedes-Benz indicates an Intake Air Temperature Circuit Range/Performance Problem, suggesting an issue with the intake air temperature sensor.
3. What are the possible causes of OBDII code P0111 in a Mercedes-Benz?
Possible causes of OBDII code P0111 in a Mercedes-Benz include a faulty intake air temperature sensor, damaged wiring or connectors, intake air leaks, or issues with the engine control module.
4. How can I diagnose the OBDII code P0111 in my Mercedes-Benz?
To diagnose OBDII code P0111 in your Mercedes-Benz, you can use an OBDII scanner to retrieve the code and then inspect the intake air temperature sensor, wiring, and connectors for any visible damage or issues.
5. Can I drive my Mercedes-Benz with OBDII code P0111?
It is not recommended to drive your Mercedes-Benz with OBDII code P0111, as it can lead to further engine damage and potential safety hazards. It's best to address the issue promptly.
6. How can I repair OBDII code P0111 in my Mercedes-Benz?
To repair OBDII code P0111 in your Mercedes-Benz, you may need to replace the faulty intake air temperature sensor, repair any damaged wiring or connectors, and clear the trouble code with an OBDII scanner.
7. Will resetting the OBDII code P0111 in my Mercedes-Benz make the issue go away?
Resetting the OBDII code P0111 in your Mercedes-Benz may temporarily clear the code, but if the underlying issue is not resolved, the code is likely to reappear. It's crucial to address the root cause of the problem.
8. Can a dirty air filter cause OBDII code P0111 in a Mercedes-Benz?
A dirty air filter may not directly cause OBDII code P0111 in a Mercedes-Benz, but it can affect the overall performance of the engine and indirectly contribute to sensor readings that trigger the code.
9. How can I prevent OBDII code P0111 from occurring in my Mercedes-Benz?
To prevent OBDII code P0111 in your Mercedes-Benz, it's essential to perform regular maintenance, including checking and replacing the air filter, inspecting the intake air temperature sensor, and addressing any engine issues promptly.
10. Is it safe to continue driving with OBDII code P0111 appearing intermittently in my Mercedes-Benz?
It is best not to drive your Mercedes-Benz with OBDII code P0111 appearing intermittently, as it indicates a potential issue with the intake air temperature sensor or related components that can impact the engine's performance and reliability.
Discuss the causes and fixes for P0111 Mercedes-Benz OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
