P0111 Lincoln Code - Intake Air Temperature Sensor 1 Circuit Range/Performance Problem
Quick Answer
The Intake Air Temperature (IAT) Sensor is a thermistor device in which resistance changes with temperature. Common causes include Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted, Intake Air Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0111 Lincoln indicates Intake Air Temperature Sensor 1 Circuit Range/Performance Problem.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted, Intake Air Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0111 Lincoln Description
Thermistor-type sensors are considered passive sensors. A passive sensor is connected to a voltage divider network so that varying the resistance of the passive sensor causes a variation in total current flow. The voltage that is dropped across a fixed resistor in a series with the sensor resistor determines the voltage signal at the PCM. This voltage signal is equal to the reference voltage minus the voltage drop across the fixed resistor.
The IAT sensor provides air temperature information to the PCM. The PCM uses the air temperature information as a correction factor in the calculation of fuel, spark, and airflow.
The IAT sensor provides a quicker temperature change response time than the Engine Coolant Temperature (ECT) or Cylinder Head Temperature (CHT) sensor.
Currently, there are 2 types of IAT sensors used, a stand-alone and an integrated type. Both types function the same, however, the integrated type is incorporated into the Mass Air Flow (MAF) Sensor, the Manifold Absolute Pressure and Temperature (MAPT) Sensor, or the Turbocharger Intake Pressure and Temperature (TCIPT) Sensor instead of being a stand-alone sensor.
This Diagnostic Trouble Code (DTC) will be set if the IAT Sensor value exceeds the maximum calibrated temperature threshold while driving.
What are the Possible Causes of the DTC P0111 Lincoln?
- Faulty Intake Air Temperature (IAT) Sensor
- Intake Air Temperature Sensor harness is open or shorted
- Intake Air Temperature Sensor circuit poor electrical connection
How to Fix the DTC P0111 Lincoln?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0111 Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0111 Lincoln code?
Need more information on how to fix the P0111 Lincoln code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0111 Lincoln code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0111 Lincoln Code
What does the OBDII code P0111 mean on a Lincoln vehicle?
P0111 indicates that the Engine Control Module (ECM) has detected a problem with the Intake Air Temperature (IAT) Sensor 1 circuit, specifically that its readings are out of the expected range or inconsistent.
What are the common symptoms of P0111 on a Lincoln?
Symptoms may include poor engine performance, rough idling, reduced fuel efficiency, difficulty starting, and an illuminated Check Engine Light.
What causes the P0111 code to appear?
Common causes include a faulty IAT sensor, damaged or corroded wiring or connectors, intake air leaks, or an engine control module malfunction.
Can I drive my Lincoln with a P0111 code?
Driving with a P0111 code is possible in some cases, but it may lead to poor performance and increased fuel consumption. Prolonged driving without addressing the issue can cause additional engine problems.
How do I diagnose the P0111 code on a Lincoln?
Diagnose by using an OBDII scanner to confirm the code, visually inspecting the IAT sensor and its wiring, checking for intake air leaks, and testing the sensor’s resistance to ensure it functions properly.
Where is the IAT sensor located in a Lincoln?
The IAT sensor is typically located on or near the air intake tubing, close to the air filter housing or throttle body.
How can I fix the P0111 code on my Lincoln?
Repairs may include replacing the faulty IAT sensor, repairing damaged wiring or connectors, fixing intake air leaks, or reprogramming or replacing the ECM if necessary.
How much does it cost to fix a P0111 code on a Lincoln?
Repair costs vary but typically range from $50 to $200 for parts and labor, depending on whether the issue is with the sensor, wiring, or other components.
Can a dirty air filter cause the P0111 code?
Yes, a dirty or clogged air filter can restrict airflow and cause inaccurate readings from the IAT sensor, potentially triggering the P0111 code.
Do I need to reset the Check Engine Light after fixing the P0111 code?
Yes, after completing the repairs, you should use an OBDII scanner to clear the code and reset the Check Engine Light. If the issue is resolved, the light should not return.
Discuss the causes and fixes for P0111 Lincoln OBDII Code
Code P0111 Lincoln comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
