P0111 BMW Code - Intake Air Temperature Circuit Range/Performance Bank 1
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0111 BMW indicates Intake Air Temperature Circuit Range/Performance Bank 1.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0111 BMW Description
What are the Possible Causes of the DTC P0111 BMW?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0111 BMW?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0111 BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0111 BMW code?
Need more information on how to fix the P0111 BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0111 BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0111 BMW Code
1. What does the OBDII code P0111 mean on a BMW?
P0111 indicates an issue with the Intake Air Temperature (IAT) circuit, specifically that the sensor's performance or range is outside the expected parameters for Bank 1.
2. What are the common symptoms of the P0111 code on a BMW?
Symptoms may include poor engine performance, rough idling, reduced fuel efficiency, difficulty starting, or an illuminated Check Engine Light.
3. What causes the P0111 code to appear on a BMW?
Common causes include a faulty IAT sensor, wiring issues like damaged or corroded connections, intake air leaks, or a malfunctioning engine control module (ECM).
4. Can I drive my BMW with a P0111 code?
It’s possible to drive with this code, but it’s not recommended as it can lead to poor performance, increased emissions, and potential damage to other components over time.
5. How do I troubleshoot the P0111 code on a BMW?
Start by inspecting the IAT sensor and its wiring for damage or corrosion. Check for intake air leaks and ensure the sensor is securely connected. If these appear fine, perform a diagnostic scan to confirm sensor readings.
6. How do I fix the P0111 code on my BMW?
Repairs may involve replacing the IAT sensor, repairing or replacing damaged wiring, fixing air intake leaks, or recalibrating the ECM if needed.
7. Where is the IAT sensor located in a BMW?
The IAT sensor is typically located in the intake manifold or integrated into the mass airflow (MAF) sensor, depending on the BMW model.
8. What tools are needed to fix a P0111 code on a BMW?
You’ll need an OBDII scanner, multimeter, basic hand tools, and potentially a replacement IAT sensor or wiring components.
9. How much does it cost to fix the P0111 code on a BMW?
The cost can vary, but replacing an IAT sensor typically ranges from $50 to $150 for parts, plus labor costs if done by a professional.
10. Can a dirty air filter cause a P0111 code on a BMW?
Yes, a clogged or dirty air filter can restrict airflow, potentially affecting the IAT sensor readings and triggering the P0111 code.
Discuss the causes and fixes for P0111 BMW OBDII Code
Code P0111 BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
