AutoCodes – GMC – P0060 2015 GMC Sierra

P0060 2015 GMC Sierra Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0060 2015 GMC Sierra indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 261

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 2015 GMC Sierra Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects the HO2S heater is not within a specified resistance range at engine start-up.

OBDII Code P0060 2015 GMC Sierra - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 2015 GMC Sierra Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 2015 GMC Sierra?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0060 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 2015 GMC Sierra code?

Need more information on how to fix the P0060 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 2015 GMC Sierra Code

1. What is the meaning of OBDII code P0060 for a 2015 GMC Sierra?

The OBDII code P0060 for a 2015 GMC Sierra refers to a fault with the HO2S (Heated Oxygen Sensor) Heater Resistance in Bank 2 Sensor 2.

2. What are the common symptoms of OBDII code P0060 in a 2015 GMC Sierra?

Common symptoms of OBDII code P0060 in a 2015 GMC Sierra may include poor engine performance, decreased fuel efficiency, rough idling, and the illumination of the Check Engine Light.

3. What are the possible causes of OBDII code P0060 in a 2015 GMC Sierra?

Possible causes of OBDII code P0060 in a 2015 GMC Sierra include a faulty HO2S heater, damaged wiring or connectors, a blown fuse, or issues with the engine control module.

4. How can I diagnose the HO2S Heater Resistance Bank 2 Sensor 2 issue in a 2015 GMC Sierra?

Diagnosing the HO2S Heater Resistance Bank 2 Sensor 2 issue in a 2015 GMC Sierra typically involves checking the sensor's resistance with a multimeter, inspecting the wiring and connectors for damage, and testing the fuse related to the sensor.

5. What are the repair options for resolving OBDII code P0060 in a 2015 GMC Sierra?

Repair options for resolving OBDII code P0060 in a 2015 GMC Sierra may include replacing the faulty HO2S sensor, repairing damaged wiring or connectors, replacing blown fuses, or reprogramming the engine control module if necessary.

6. Can I continue driving my 2015 GMC Sierra with OBDII code P0060?

It is not recommended to continue driving your 2015 GMC Sierra with OBDII code P0060, as it can lead to further engine damage and potentially worsen fuel efficiency. It is best to address the issue promptly.

7. How much does it cost to repair OBDII code P0060 in a 2015 GMC Sierra?

The cost to repair OBDII code P0060 in a 2015 GMC Sierra can vary depending on the exact cause of the issue, labor rates in your area, and whether you choose to repair it yourself or take it to a professional mechanic.

8. Can a DIY enthusiast fix OBDII code P0060 in a 2015 GMC Sierra?

Yes, a DIY enthusiast with the necessary tools and knowledge can potentially fix OBDII code P0060 in a 2015 GMC Sierra by following diagnostic procedures and repair instructions provided in the vehicle's service manual.

9. How often does the HO2S Heater Resistance Bank 2 Sensor 2 need to be replaced in a 2015 GMC Sierra?

The HO2S Heater Resistance Bank 2 Sensor 2 in a 2015 GMC Sierra typically does not need frequent replacement unless it fails due to age, wear, or other underlying issues causing OBDII code P0060.

10. What can happen if OBDII code P0060 in a 2015 GMC Sierra is ignored?

Ignoring OBDII code P0060 in a 2015 GMC Sierra can lead to decreased engine performance, reduced fuel efficiency, potential damage to other engine components, and may cause the vehicle to fail emissions tests.