AutoCodes – GMC – P0060 2016 GMC Sierra

P0060 2016 GMC Sierra Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0060 2016 GMC Sierra indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 229

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 2016 GMC Sierra Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects the HO2S heater is not within a specified resistance range at engine start-up.

OBDII Code P0060 2016 GMC Sierra - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 2016 GMC Sierra Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 2016 GMC Sierra?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0060 2016 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 2016 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 2016 GMC Sierra code?

Need more information on how to fix the P0060 2016 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 2016 GMC Sierra Code

1. What does OBDII code P0060 for a 2016 GMC Sierra indicate?

Code P0060 stands for "HO2S Heater Resistance Bank 2 Sensor 2," signaling an issue with the oxygen sensor heater circuit in the second bank and sensor position on the vehicle.

2. What are the common symptoms of OBDII code P0060 on a 2016 GMC Sierra?

Common symptoms of code P0060 may include decreased fuel efficiency, rough idling, engine misfires, and an illuminated check engine light on the dashboard.

3. What are the potential causes of OBDII code P0060 on a 2016 GMC Sierra?

Possible causes of code P0060 include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, a blown fuse, or a problem with the vehicle's engine control module (ECM).

4. How can I diagnose OBDII code P0060 on my 2016 GMC Sierra?

To diagnose code P0060, you can use an OBDII scanner to retrieve the specific fault code, visually inspect the sensor and its wiring for any visible damage, and perform electrical tests to check for continuity and resistance in the sensor heater circuit.

5. Can I continue driving my 2016 GMC Sierra with OBDII code P0060?

While the vehicle may still be operational with code P0060, it is recommended to address the issue promptly to prevent potential damage to the engine and ensure optimal performance and fuel efficiency.

6. How can I repair OBDII code P0060 on my 2016 GMC Sierra?

Repairing code P0060 typically involves replacing the faulty oxygen sensor, repairing any damaged wiring or connectors, checking and replacing blown fuses if necessary, and resetting the ECM to clear the fault code.

7. Will resetting the check engine light resolve OBDII code P0060 on my 2016 GMC Sierra?

Resetting the check engine light may temporarily clear the code, but if the underlying issue causing code P0060 is not addressed, the fault code is likely to reappear once the ECM detects the problem again.

8. Is it possible to prevent OBDII code P0060 from appearing on my 2016 GMC Sierra?

Regular vehicle maintenance, including inspecting and replacing oxygen sensors at recommended intervals, can help prevent code P0060 from occurring. Additionally, avoiding driving with a malfunctioning engine can help prevent related issues.

9. How much does it cost to fix OBDII code P0060 on a 2016 GMC Sierra?

The cost of fixing code P0060 can vary depending on the specific cause of the issue, the labor rates in your area, and whether you choose to address the problem yourself or seek professional assistance. Costs may include parts, labor, and diagnostic fees.

10. Can a DIY enthusiast repair OBDII code P0060 on a 2016 GMC Sierra?

Depending on your automotive repair skills and access to tools, a DIY enthusiast may be able to address code P0060 by following repair guides, consulting service manuals, and using proper diagnostic equipment. However, if in doubt, seeking professional help is advisable.