AutoCodes – GMC – P0060 2014 GMC Sierra

P0060 2014 GMC Sierra Code - HO2S Heater Resistance Bank 2 Sensor 2

Quick Answer

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0060 2014 GMC Sierra indicates HO2S Heater Resistance Bank 2 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2, Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted, Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 251

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0060 2014 GMC Sierra Description

Heated Oxygen Sensors (HO2S) are used for fuel control and post catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content in the exhaust stream. The HO2S must reach an operating temperature to provide an accurate voltage signal. A heating element inside the HO2S minimizes the time required for the sensors to reach operating temperature. Voltage is provided to the heater by an ignition voltage circuit through a fuse. With the engine running, the ground is provided to the heater by the HO2S heater low control circuit through a low side driver within the Engine Control Module (ECM). The ECM uses Pulse Width Modulation (PWM) to control the HO2S heater operation to maintain a specific HO2S operating temperature range.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects the HO2S heater is not within a specified resistance range at engine start-up.

OBDII Code P0060 2014 GMC Sierra - HO2S Heater Resistance Bank 2 Sensor 2 - AutoCodes.com — P0060 2014 GMC Sierra Code - HO2S Heater Resistance Bank 2 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0060 2014 GMC Sierra?

Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 2
Heated Oxygen Sensor Bank 2 Sensor 2 harness is open shorted
Heated Oxygen Sensor Bank 2 Sensor 2 circuit poor electrical connection
Heated Oxygen Sensor Bank 2 Sensor 2 circuit fuse
Faulty Engine Control Module (ECM)

How to Fix the DTC P0060 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it takes the sensor to warm up and start sending an adequate signal. The code is set when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can cause the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the fuse and connector are OK, replacing the O2 Sensor usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0060 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0060 2014 GMC Sierra code?

Need more information on how to fix the P0060 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0060 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0060 2014 GMC Sierra Code

1. What does OBDII code P0060 for a 2014 GMC Sierra mean?

- OBDII code P0060 on a 2014 GMC Sierra specifically refers to a fault with the HO2S (Heated Oxygen Sensor) Heater Resistance for Bank 2 Sensor 2.

2. What are common symptoms of OBDII code P0060 on a 2014 GMC Sierra?

- Common symptoms of P0060 may include poor engine performance, decreased fuel efficiency, rough idling, and the illumination of the check engine light.

3. What are the possible causes of OBDII code P0060 on a 2014 GMC Sierra?

- The possible causes of P0060 can include a faulty HO2S heater, damaged wiring or connectors, a blown fuse in the heating circuit, or an issue with the PCM (Powertrain Control Module).

4. How can I diagnose OBDII code P0060 on my 2014 GMC Sierra?

- Diagnosing P0060 typically involves using a scan tool to retrieve the specific code, testing the HO2S heater circuit for resistance, inspecting related wiring and connectors, and verifying the functionality of the PCM.

5. Can I drive my 2014 GMC Sierra with OBDII code P0060?

- It is generally not recommended to drive your vehicle with an unresolved P0060 code, as it can lead to further damage and potential safety hazards. It is advised to address the issue promptly.

6. How can I repair OBDII code P0060 on a 2014 GMC Sierra?

- Repairing P0060 may involve replacing the faulty HO2S sensor, repairing damaged wiring or connectors, replacing a blown fuse, or addressing any issues with the PCM as necessary.

7. Will resetting the check engine light fix OBDII code P0060 on a 2014 GMC Sierra?

- Simply resetting the check engine light will not fix the underlying issue causing P0060. It is important to diagnose and address the root cause of the problem for a proper repair.

8. How much does it cost to fix OBDII code P0060 on a 2014 GMC Sierra?

- The cost of repairing P0060 can vary depending on the specific cause of the issue, the parts needed for replacement, and whether you perform the repair yourself or seek professional assistance.

9. Can a DIY enthusiast repair OBDII code P0060 on a 2014 GMC Sierra?

- Depending on your skill level and access to tools, a DIY enthusiast may be able to repair P0060 by following diagnostic procedures and replacing the necessary components. However, professional help may be needed for complex issues.

10. How often does OBDII code P0060 occur in a 2014 GMC Sierra?

- The occurrence of P0060 in a 2014 GMC Sierra can vary, but it is a relatively common OBDII code associated with the HO2S heater circuit, especially in older vehicles or those with high mileage.