AutoCodes – Ford – P2072 Ford

P2072 Ford Code - Throttle Actuator Control System - Ice Blockage

Quick Answer

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2072 Ford indicates Throttle Actuator Control System - Ice Blockage.
Common causes: Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 19,010

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 24, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2072 Ford Description

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. This code does not imply any system concerns, only that the mode has occurred, and that mode may be causing a long start time.

OBDII Code P2072 Ford - Throttle Actuator Control System - Ice Blockage - AutoCodes.com — P2072 Ford Code - Throttle Actuator Control System - Ice Blockage

What does this mean?

What are the Possible Causes of the DTC P2072 Ford?

Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern

How to Fix the DTC P2072 Ford?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Do not install a new electronic throttle body (ETB) for this DTC. Check the PCV system for evidence of water or ice. Disconnect the intake air fresh air plenum from the throttle body. Check for water or oily residue at the PCV fresh air port. Disconnect the tube at the valve cover and check the tube for ice obstruction/ice. Start the engine and, to check the PCV system, place a piece of cardboard on the crankcase vent in the rocker cover. If the cardboard is held on the crankcase vent and fumes are not exiting, reconnect the tube to the valve cover and the intake air port. If the test passes, the PCV system is OK. If the cardboard is not held in place, turn off the engine and check the PCV valve side of the system for ice or obstruction and repair as necessary. If no obstruction is found there, isolate and repair any obstruction in the intake manifold connection. If no obstruction is found there, make sure the PCV coolant heater is functional and repair as necessary. If no concern is present, make sure the PCV valve is allowing the correct vacuum flow and repair as necessary.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2072 Ford code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2072 Ford code?

Need more information on how to fix the P2072 Ford code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2072 Ford code diagnosed by a professional: Find a repair shop in your area

Information for Specific Ford Models

P2072 2006 Ford Fusion — Throttle Actuator Control System - Ice Blockage
P2072 2007 Ford Fusion — Throttle Actuator Control System - Ice Blockage
P2072 2008 Ford Fusion — Throttle Actuator Control System - Ice Blockage
P2072 2009 Ford Fusion — Throttle Actuator Control System - Ice Blockage
P2072 2010 Ford Fusion — Throttle Actuator Control System - Ice Blockage
P2072 2011 Ford Fusion — Throttle Actuator Control System - Ice Blockage
P2072 2012 Ford Fusion — Throttle Actuator Control System - Ice Blockage

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2072 Ford Code

1. What are common symptoms of OBDII code P2072 in a Ford vehicle?

- Common symptoms include reduced engine power, rough idling, poor acceleration, and the vehicle going into limp mode.

2. What does the OBDII code P2072 in a Ford indicate?

- The code P2072 indicates an issue with the Throttle Actuator Control System due to ice blockage.

3. What can cause the Throttle Actuator Control System to be blocked by ice in a Ford vehicle?

- Ice blockage in the Throttle Actuator Control System can be caused by driving in extremely cold conditions or water intrusion in the throttle body.

4. How can I diagnose the ice blockage issue related to OBDII code P2072 in my Ford?

- Diagnosis involves checking for ice buildup in the throttle body, inspecting the throttle actuator control motor, and ensuring the electrical connections are secure.

5. Is it safe to continue driving with OBDII code P2072 related to ice blockage in a Ford?

- It is not recommended to continue driving with this code, as it can lead to further damage to the throttle actuator control system and affect vehicle performance.

6. Can I clear the OBDII code P2072 related to ice blockage in a Ford by simply resetting the ECU?

- While resetting the ECU may temporarily clear the code, it is crucial to address the root cause of the ice blockage issue to prevent it from reoccurring.

7. What are some repair tips for resolving the OBDII code P2072 in a Ford due to ice blockage?

- Repair tips include thawing out the ice blockage, ensuring proper insulation around the throttle body, and using a throttle body cleaner to remove any residue.

8. Is it necessary to replace any components when dealing with OBDII code P2072 caused by ice blockage in a Ford?

- In severe cases, components such as the throttle body or throttle actuator control motor may need to be replaced if they are damaged due to ice blockage.

9. How can I prevent ice blockage in the Throttle Actuator Control System triggering OBDII code P2072 in my Ford?

- To prevent ice blockage, avoid driving in extreme cold conditions, ensure the throttle body is properly sealed, and keep the vehicle well-maintained.

10. Can a professional mechanic help me diagnose and repair the OBDII code P2072 related to ice blockage in my Ford?

- Yes, a professional mechanic with experience in diagnosing and repairing throttle actuator control system issues can help address the OBDII code P2072 effectively.