AutoCodes – Ford – P2072 2009 Ford Fusion

P2072 2009 Ford Fusion Code - Throttle Actuator Control System - Ice Blockage

Quick Answer

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2072 2009 Ford Fusion indicates Throttle Actuator Control System - Ice Blockage.
Common causes: Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,779

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 24, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2072 2009 Ford Fusion Description

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. This code does not imply any system concerns, only that the mode has occurred, and that mode may be causing a long start time.

OBDII Code P2072 2009 Ford Fusion - Throttle Actuator Control System - Ice Blockage - AutoCodes.com — P2072 2009 Ford Fusion Code - Throttle Actuator Control System - Ice Blockage

What does this mean?

What are the Possible Causes of the DTC P2072 2009 Ford Fusion?

Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern

How to Fix the DTC P2072 2009 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Do not install a new electronic throttle body (ETB) for this DTC. Check the PCV system for evidence of water or ice. Disconnect the intake air fresh air plenum from the throttle body. Check for water or oily residue at the PCV fresh air port. Disconnect the tube at the valve cover and check the tube for ice obstruction/ice. Start the engine and, to check the PCV system, place a piece of cardboard on the crankcase vent in the rocker cover. If the cardboard is held on the crankcase vent and fumes are not exiting, reconnect the tube to the valve cover and the intake air port. If the test passes, the PCV system is OK. If the cardboard is not held in place, turn off the engine and check the PCV valve side of the system for ice or obstruction and repair as necessary. If no obstruction is found there, isolate and repair any obstruction in the intake manifold connection. If no obstruction is found there, make sure the PCV coolant heater is functional and repair as necessary. If no concern is present, make sure the PCV valve is allowing the correct vacuum flow and repair as necessary.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2072 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2072 2009 Ford Fusion code?

Need more information on how to fix the P2072 2009 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2072 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2072 2009 Ford Fusion Code

1. What are the common symptoms of OBDII code P2072 in a 2009 Ford Fusion?

The common symptoms of code P2072 in a 2009 Ford Fusion include reduced engine power, rough idle, stalling, and the Check Engine Light illuminating.

2. What is the main cause of OBDII code P2072 in a 2009 Ford Fusion?

The main cause of code P2072 in a 2009 Ford Fusion is an ice blockage in the throttle actuator control system, specifically in the throttle body.

3. How can I diagnose an ice blockage in the throttle actuator control system of my 2009 Ford Fusion?

To diagnose an ice blockage, visually inspect the throttle body for any ice accumulation, check the electrical connections for corrosion, and use a scan tool to read the fault codes stored in the vehicle's computer.

4. Can extreme weather conditions lead to the occurrence of OBDII code P2072 in a 2009 Ford Fusion?

Yes, extreme cold weather conditions can lead to the formation of ice blockages in the throttle actuator control system, triggering code P2072 in a 2009 Ford Fusion.

5. What are some repair tips for resolving OBDII code P2072 in a 2009 Ford Fusion?

To resolve code P2072, you can try warming up the vehicle by parking it in a heated garage or using a hairdryer to melt any ice blockages in the throttle body. Additionally, ensuring proper insulation and sealing of the throttle body can help prevent future occurrences.

6. Can driving in snowy or icy conditions increase the likelihood of OBDII code P2072 in a 2009 Ford Fusion?

Yes, driving in snowy or icy conditions can increase the likelihood of code P2072 due to the potential for ice to accumulate in the throttle body and disrupt the throttle actuator control system.

7. Is it safe to continue driving my 2009 Ford Fusion with OBDII code P2072 present?

It is not recommended to continue driving your vehicle with code P2072 present, as it can lead to further engine performance issues and potential safety hazards. It is best to address the issue promptly.

8. How can I prevent ice blockages in the throttle actuator control system of my 2009 Ford Fusion?

To prevent ice blockages, consider using a throttle body heater, parking in a heated garage, or installing insulating covers during extreme cold weather conditions.

9. Can a DIY enthusiast resolve OBDII code P2072 in a 2009 Ford Fusion, or is professional assistance recommended?

While some DIY enthusiasts may be able to address code P2072 by melting ice blockages and ensuring proper insulation, professional assistance is recommended for thorough diagnosis and repair to prevent future occurrences.

10. Are there any recalls or service bulletins related to OBDII code P2072 in a 2009 Ford Fusion?

It is recommended to check with Ford or authorized service centers for any recalls or service bulletins related to code P2072 in a 2009 Ford Fusion, as manufacturers may provide guidance or solutions for such issues.