AutoCodes – Ford – P2072 2011 Ford Fusion

P2072 2011 Ford Fusion Code - Throttle Actuator Control System - Ice Blockage

Quick Answer

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2072 2011 Ford Fusion indicates Throttle Actuator Control System - Ice Blockage.
Common causes: Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,854

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 24, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2072 2011 Ford Fusion Description

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. This code does not imply any system concerns, only that the mode has occurred, and that mode may be causing a long start time.

OBDII Code P2072 2011 Ford Fusion - Throttle Actuator Control System - Ice Blockage - AutoCodes.com — P2072 2011 Ford Fusion Code - Throttle Actuator Control System - Ice Blockage

What does this mean?

What are the Possible Causes of the DTC P2072 2011 Ford Fusion?

Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern

How to Fix the DTC P2072 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Do not install a new electronic throttle body (ETB) for this DTC. Check the PCV system for evidence of water or ice. Disconnect the intake air fresh air plenum from the throttle body. Check for water or oily residue at the PCV fresh air port. Disconnect the tube at the valve cover and check the tube for ice obstruction/ice. Start the engine and, to check the PCV system, place a piece of cardboard on the crankcase vent in the rocker cover. If the cardboard is held on the crankcase vent and fumes are not exiting, reconnect the tube to the valve cover and the intake air port. If the test passes, the PCV system is OK. If the cardboard is not held in place, turn off the engine and check the PCV valve side of the system for ice or obstruction and repair as necessary. If no obstruction is found there, isolate and repair any obstruction in the intake manifold connection. If no obstruction is found there, make sure the PCV coolant heater is functional and repair as necessary. If no concern is present, make sure the PCV valve is allowing the correct vacuum flow and repair as necessary.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2072 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2072 2011 Ford Fusion code?

Need more information on how to fix the P2072 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2072 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2072 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P2072 (Throttle Actuator Control System - Ice Blockage) in a 2011 Ford Fusion?

- Common symptoms include reduced engine power, rough idling, hesitation or stalling, and the Check Engine light illuminated on the dashboard.

2. What causes the OBDII code P2072 to trigger in a 2011 Ford Fusion?

- The code P2072 is triggered when the Engine Control Module (ECM) detects an ice blockage in the throttle actuator control system, usually due to condensation or water ingress.

3. How can I diagnose the ice blockage issue causing code P2072 in my 2011 Ford Fusion?

- A thorough visual inspection of the throttle body and related components for ice accumulation, water droplets, or signs of moisture is recommended. Checking for any damaged or corroded wiring and connectors is also important.

4. Can I drive my 2011 Ford Fusion with OBDII code P2072 present?

- It is not recommended to drive the vehicle with code P2072 active, as it can lead to potential drivability issues and further damage to the throttle actuator control system.

5. What are some repair tips for fixing OBDII code P2072 in a 2011 Ford Fusion?

- Clearing any ice blockage from the throttle actuator control system, ensuring proper sealing of components to prevent water ingress, and addressing any underlying issues causing condensation are key repair steps.

6. Is it possible to prevent OBDII code P2072 from recurring in my 2011 Ford Fusion?

- Regularly inspecting and maintaining the throttle body and related components, especially in wet or cold weather conditions, can help prevent ice blockages and the recurrence of code P2072.

7. Can a DIY enthusiast fix OBDII code P2072 in a 2011 Ford Fusion?

- While some basic inspections and maintenance tasks can be performed by DIY enthusiasts, resolving the underlying issue causing code P2072 may require advanced diagnostic tools and expertise, best left to professionals.

8. How much does it typically cost to repair OBDII code P2072 in a 2011 Ford Fusion?

- The cost of repairing code P2072 can vary depending on the extent of the issue, parts needed for replacement, and labor costs. It is advisable to consult a mechanic for an accurate cost estimate.

9. Will resetting the Check Engine light resolve OBDII code P2072 in my 2011 Ford Fusion?

- Simply resetting the Check Engine light without addressing the underlying issue causing code P2072 will not fix the problem. It is crucial to diagnose and repair the root cause to prevent the code from reappearing.

10. How urgent is it to address OBDII code P2072 in a 2011 Ford Fusion?

- It is recommended to address code P2072 promptly to prevent potential drivability issues and further damage to the throttle actuator control system. Ignoring the code can lead to more severe problems over time.