AutoCodes – Ford – P2072 2006 Ford Fusion

P2072 2006 Ford Fusion Code - Throttle Actuator Control System - Ice Blockage

Quick Answer

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P2072 2006 Ford Fusion indicates Throttle Actuator Control System - Ice Blockage.
Common causes: Common causes include Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,280

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Feb 24, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P2072 2006 Ford Fusion Description

The P2072 code only identifies that the strategy has carried out several open and close cycles to remove potential ice build up. This code does not imply any system concerns, only that the mode has occurred, and that mode may be causing a long start time.

OBDII Code P2072 2006 Ford Fusion - Throttle Actuator Control System - Ice Blockage - AutoCodes.com — P2072 2006 Ford Fusion Code - Throttle Actuator Control System - Ice Blockage

What does this mean?

What are the Possible Causes of the DTC P2072 2006 Ford Fusion?

Ice or oil in the intake air system could be the result of a positive crankcase ventilation (PCV) system concern

How to Fix the DTC P2072 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Do not install a new electronic throttle body (ETB) for this DTC. Check the PCV system for evidence of water or ice. Disconnect the intake air fresh air plenum from the throttle body. Check for water or oily residue at the PCV fresh air port. Disconnect the tube at the valve cover and check the tube for ice obstruction/ice. Start the engine and, to check the PCV system, place a piece of cardboard on the crankcase vent in the rocker cover. If the cardboard is held on the crankcase vent and fumes are not exiting, reconnect the tube to the valve cover and the intake air port. If the test passes, the PCV system is OK. If the cardboard is not held in place, turn off the engine and check the PCV valve side of the system for ice or obstruction and repair as necessary. If no obstruction is found there, isolate and repair any obstruction in the intake manifold connection. If no obstruction is found there, make sure the PCV coolant heater is functional and repair as necessary. If no concern is present, make sure the PCV valve is allowing the correct vacuum flow and repair as necessary.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P2072 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P2072 2006 Ford Fusion code?

Need more information on how to fix the P2072 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P2072 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P2072 2006 Ford Fusion Code

1. What are the common symptoms of OBDII code P2072 in a 2006 Ford Fusion related to Throttle Actuator Control System - Ice Blockage?

- Common symptoms include reduced engine power, rough idling, and potential stalling of the vehicle.

2. What could cause the Throttle Actuator Control System - Ice Blockage code P2072 to trigger in a 2006 Ford Fusion?

- The code may be triggered due to ice or debris blocking the throttle actuator control system, which can disrupt the proper functioning of the throttle body.

3. How can I diagnose if ice blockage is the culprit behind OBDII code P2072 in my 2006 Ford Fusion?

- You can inspect the throttle body and surrounding components for any signs of ice or debris accumulation. Thoroughly cleaning the throttle body may also help in identifying the issue.

4. Are there any temporary solutions I can try to address OBDII code P2072 related to ice blockage in my 2006 Ford Fusion?

- In case of suspected ice blockage, parking the vehicle in a warm indoor space or using a hairdryer to defrost the throttle body may provide temporary relief.

5. How should I go about repairing OBDII code P2072 in a 2006 Ford Fusion caused by Throttle Actuator Control System - Ice Blockage?

- The repair typically involves removing any ice or debris blocking the throttle actuator control system and ensuring proper insulation to prevent future occurrences.

6. Can extreme weather conditions contribute to triggering code P2072 in a 2006 Ford Fusion?

- Yes, extreme cold weather conditions can lead to ice formation around the throttle body, potentially causing the Throttle Actuator Control System - Ice Blockage code to trigger.

7. Is it safe to continue driving my 2006 Ford Fusion when OBDII code P2072 related to ice blockage is present?

- It is not recommended to drive the vehicle with code P2072 active, as it can lead to performance issues and potential safety concerns. It is best to address the issue promptly.

8. How can I prevent OBDII code P2072 from reoccurring in my 2006 Ford Fusion due to ice blockage?

- Regularly inspecting and cleaning the throttle body, especially before extreme weather conditions, can help prevent ice blockage and the recurrence of code P2072.

9. Are there any specific tools or products recommended for cleaning the throttle body to prevent ice blockage in a 2006 Ford Fusion?

- Using a throttle body cleaner and a soft brush can help effectively clean the throttle body and remove any debris that may contribute to ice blockage.

10. Can a mechanic help diagnose and repair OBDII code P2072 related to ice blockage in my 2006 Ford Fusion?

- Yes, a qualified mechanic can conduct a thorough inspection, diagnose the issue accurately, and perform the necessary repairs to address the Throttle Actuator Control System - Ice Blockage code.