P1106 Honda Code - Barometric Pressure Sensor Range/Performance Problem
Quick Answer
The Barometric Pressure (BARO) sensor is built into the Engine Control Module (ECM) and monitors atmospheric pressure. Common causes include Engine Control Module (ECM) outdated or incorrect software, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1106 Honda indicates Barometric Pressure Sensor Range/Performance Problem.
- Common causes
- Common causes include Engine Control Module (ECM) outdated or incorrect software, Faulty Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1106 Honda Description
What are the Possible Causes of the DTC P1106 Honda?
- Engine Control Module (ECM) outdated or incorrect software
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1106 Honda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
- Clear code
- Start the engine
- Hold the engine at 3,000 rpm with no load (in Park or neutral) until the radiator fan comes on, then let it idle
- Test-drive with the A/T in 2nd position, M/T in 4th gear
- Press accelerator pedal over 1/2 way down for five seconds
- Check for codes again
- If the codes comes back ECM may need to be replace. If codes don't came back, problem is repaired.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1106 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1106 Honda code?
Need more information on how to fix the P1106 Honda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1106 Honda code diagnosed by a professional: Find a repair shop in your area
Information for Specific Honda Models
- P1106 1996 Honda Civic — Barometric Pressure Sensor Range/Performance Problem
- P1106 1997 Honda Civic — Barometric Pressure Sensor Range/Performance Problem
- P1106 1998 Honda Civic — Barometric Pressure Sensor Range/Performance Problem
- P1106 1999 Honda Civic — Barometric Pressure Sensor Range/Performance Problem
- P1106 2000 Honda Civic — Barometric Pressure Sensor Range/Performance Problem
Frequently Asked Questions about P1106 Honda Code
1. What are the common symptoms of OBDII code P1106 in a Honda vehicle?
- Common symptoms of code P1106 may include rough idling, decreased engine performance, poor fuel efficiency, and the illumination of the Check Engine Light.
2. What does the OBDII code P1106 Honda indicate?
- The OBDII code P1106 in a Honda indicates a Barometric Pressure Sensor Range/Performance Problem.
3. What are the possible causes of OBDII code P1106 in a Honda?
- The possible causes of code P1106 in a Honda may include a faulty barometric pressure sensor, wiring issues, vacuum leaks, or a problem with the engine's air intake system.
4. How can I diagnose the OBDII code P1106 in my Honda?
- Diagnosis of code P1106 typically involves using an OBDII scanner to retrieve the code, inspecting the barometric pressure sensor and related wiring, and checking for any vacuum leaks in the intake system.
5. Can I continue driving my Honda with OBDII code P1106?
- It is not recommended to continue driving your Honda with code P1106 as it can lead to further engine problems and potentially worsen fuel efficiency.
6. How can I repair OBDII code P1106 in my Honda?
- Repairing code P1106 may involve replacing the barometric pressure sensor, repairing any damaged wiring, fixing vacuum leaks, or cleaning the air intake system.
7. Will resetting the OBDII code P1106 in my Honda make it go away permanently?
- Resetting the code may temporarily turn off the Check Engine Light, but if the underlying issue causing code P1106 is not addressed, the code is likely to reappear.
8. Can I fix OBDII code P1106 in my Honda by simply clearing the code with an OBDII scanner?
- Clearing the code with an OBDII scanner without addressing the root cause of the issue will not fix code P1106 permanently. It is essential to diagnose and repair the underlying problem.
9. Is it possible to prevent OBDII code P1106 from occurring in my Honda?
- Regular maintenance, such as checking and replacing sensors as needed, inspecting wiring for damage, and ensuring the intake system is free of leaks, can help prevent code P1106 in your Honda.
10. How long does it typically take to repair OBDII code P1106 in a Honda?
- The time to repair code P1106 in a Honda can vary depending on the specific cause of the issue. Simple fixes like replacing a sensor or repairing wiring may take a few hours, while more complex issues could take longer to diagnose and repair.
Discuss the causes and fixes for P1106 Honda OBDII Code
Code P1106 Honda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
