AutoCodes – Generic – C0710

C0710 Code - Steering Position Signal

Quick Answer

The Steering Wheel Angle Sensor receives a 12 V reference voltage from the Electronic Brake Control Module (EBCM). Common causes include Steering Wheel Angle Sensor Centering (Calibration), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0710 indicates Steering Position Signal.
Common causes: Common causes include Steering Wheel Angle Sensor Centering (Calibration), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 22,855

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 17, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0710 Description

The Steering Wheel Angle Sensor receives a 12 V reference voltage from the Electronic Brake Control Module (EBCM). The Electronic Brake Control Module receives serial data inputs from the Steering Wheel Angle Sensor identifying the position and direction of the steering wheel rotation. The Electronic Brake Control Module utilizes this signal to calculate the driver's intended driving direction. The Diagnostic Trouble Code (DTC) will be set when the Steering Wheel Angle Sensor signal is invalid.

OBDII Code C0710 - Steering Position Signal - AutoCodes.com — C0710 Code - Steering Position Signal

What does this mean?

What are the Possible Causes of the DTC C0710?

Steering Wheel Angle Sensor Centering (Calibration)
Faulty Steering Wheel Angle Sensor
Steering Wheel Angle Sensor harness is open or shorted
Steering Wheel Angle Sensor circuit poor electrical connection
Faulty Electronic Brake Control Module (EBCM)

How to Fix the DTC C0710?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Confirm that all tires are of the proper size and that all are matching brands. Check and adjust all tires to the stated cold air pressure as identified on the tire placard. If a miss sized or non-matching brand tire is present, inform the customer that in order for the vehicle stability enhanced system to function normally, tires need to be a uniform size and rolling diameter.

Centering of the steering angle sensor might be required after certain service procedures are performed. Some of these procedures are as follows: Wheel alignment, steering gear replacement, steering column replacement, Steering Wheel Angle Sensor replacement, collision or other physical damage, and Electronic Brake Control Module (EBCM) replacement.

C0710:09 Steering Position Signal Too Fast Transitions
C0710:0A Steering Position Signal Too Slow Transitions
C0710:11 Steering Position Signal High Input
C0710:18 Steering Position Signal Low Signal Amplitude
C0710:19 Steering Position Signal High Signal Amplitude
C0710:42 Steering Position Signal Calibration Not Programmed
C0710:4B Steering Position Signal Calibration Not Learned
C0710:5A Steering Position Signal Not Plausible
C0710:71 Steering Position Signal Invalid Data

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0710 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0710 code?

Need more information on how to fix the C0710 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0710 code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

C0710 Buick — Steering Position Signal
C0710 Cadillac — Steering Position Signal
C0710 Chevrolet — Steering Position Signal
C0710 GMC — Steering Position Signal
C0710 Hummer — Steering Position Signal
C0710 Pontiac — Steering Position Signal
C0710 Saturn — Steering Position Signal

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0710 Code

What does OBDII code C0710 indicate?

OBDII code C0710 indicates a problem with the steering position signal, which may affect the vehicle's stability control and steering response.

What are common symptoms of a C0710 code?

Common symptoms include the illumination of the check engine light, erratic steering, loss of power steering assist, and potential issues with traction control.

What can cause the C0710 code to trigger?

Causes may include a faulty steering angle sensor, wiring issues, poor connections, or problems within the vehicle's electronic control unit (ECU).

How can I diagnose a C0710 code?

To diagnose a C0710 code, start by using an OBDII scanner to confirm the code, then inspect the steering angle sensor and its wiring for damage, and check for any related codes.

What repairs are typically needed for a C0710 code?

Repairs may include replacing a faulty steering angle sensor, repairing damaged wiring or connectors, or reprogramming the ECU if necessary.

Can I drive my car with a C0710 code?

While you can drive with a C0710 code, it is not recommended as it may affect steering performance and vehicle stability, potentially leading to unsafe driving conditions.

How much does it typically cost to fix a C0710 code?

The cost to fix a C0710 code can vary widely based on the specific issue but may range from $100 for simple wiring repairs to over $500 for replacing the steering angle sensor.

Will clearing the C0710 code fix the problem?

Clearing the C0710 code will not fix the underlying issue. If the problem persists, the code will likely return after clearing.

How can I prevent a C0710 code from occurring?

Preventative measures include regular vehicle maintenance, ensuring electrical connections are secure, and addressing steering issues promptly before they escalate.