AutoCodes – Buick – C0710 Buick

C0710 Buick Code - Steering Position Signal

Quick Answer

The Steering Wheel Angle Sensor receives a 12 V reference voltage from the Electronic Brake Control Module (EBCM). Common causes include Steering Wheel Angle Sensor Centering (Calibration), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: C0710 Buick indicates Steering Position Signal.
Common causes: Common causes include Steering Wheel Angle Sensor Centering (Calibration), Faulty Steering Wheel Angle Sensor, Steering Wheel Angle Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 9,001

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 17, 2023

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code C0710 Buick Description

The Steering Wheel Angle Sensor receives a 12 V reference voltage from the Electronic Brake Control Module (EBCM). The Electronic Brake Control Module receives serial data inputs from the Steering Wheel Angle Sensor identifying the position and direction of the steering wheel rotation. The Electronic Brake Control Module utilizes this signal to calculate the driver's intended driving direction. The Diagnostic Trouble Code (DTC) will be set when the Steering Wheel Angle Sensor signal is invalid.

OBDII Code C0710 Buick - Steering Position Signal - AutoCodes.com — C0710 Buick Code - Steering Position Signal

What does this mean?

What are the Possible Causes of the DTC C0710 Buick?

Steering Wheel Angle Sensor Centering (Calibration)
Faulty Steering Wheel Angle Sensor
Steering Wheel Angle Sensor harness is open or shorted
Steering Wheel Angle Sensor circuit poor electrical connection
Faulty Electronic Brake Control Module (EBCM)

How to Fix the DTC C0710 Buick?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Confirm that all tires are of the proper size and that all are matching brands. Check and adjust all tires to the stated cold air pressure as identified on the tire placard. If a miss sized or non-matching brand tire is present, inform the customer that in order for the vehicle stability enhanced system to function normally, tires need to be a uniform size and rolling diameter.

Centering of the steering angle sensor might be required after certain service procedures are performed. Some of these procedures are as follows: Wheel alignment, steering gear replacement, steering column replacement, Steering Wheel Angle Sensor replacement, collision or other physical damage, and Electronic Brake Control Module (EBCM) replacement.

C0710:09 Steering Position Signal Too Fast Transitions
C0710:0A Steering Position Signal Too Slow Transitions
C0710:11 Steering Position Signal High Input
C0710:18 Steering Position Signal Low Signal Amplitude
C0710:19 Steering Position Signal High Signal Amplitude
C0710:42 Steering Position Signal Calibration Not Programmed
C0710:4B Steering Position Signal Calibration Not Learned
C0710:5A Steering Position Signal Not Plausible
C0710:71 Steering Position Signal Invalid Data

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the C0710 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the C0710 Buick code?

Need more information on how to fix the C0710 Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the C0710 Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about C0710 Buick Code

1. What are common symptoms of OBDII code C0710 in a Buick related to the steering position signal?

- Common symptoms include the Service Stability message appearing on the dashboard, illuminated ABS and traction control lights, and potential issues with the vehicle's stability control system.

2. What causes the OBDII code C0710 in a Buick related to the steering position signal?

- The code C0710 is often triggered by a faulty steering position sensor, a malfunctioning steering angle sensor, or wiring/connectivity issues in the steering system.

3. How can I diagnose the OBDII code C0710 in my Buick related to the steering position signal?

- Diagnosis typically involves using a professional diagnostic scanner to retrieve the specific fault code, checking the wiring and connectors for any damage, and testing the steering position sensor and steering angle sensor for proper operation.

4. Is it safe to drive my Buick with the OBDII code C0710 related to the steering position signal?

- It is not recommended to drive the vehicle with this code present, as it can affect the stability control system and compromise the vehicle's handling and safety. It is advisable to address the issue promptly.

5. Can I reset the OBDII code C0710 in my Buick related to the steering position signal by disconnecting the battery?

- While disconnecting the battery may temporarily clear the code, it is not a permanent solution. The underlying issue causing the code needs to be diagnosed and repaired to ensure the problem does not return.

6. How much does it typically cost to repair the OBDII code C0710 in a Buick related to the steering position signal?

- The cost of repairs can vary depending on the exact cause of the issue. It may range from a simple sensor replacement to more extensive repairs involving the steering system components. It is recommended to consult a professional mechanic for an accurate estimate.

7. Can I drive my Buick if the OBDII code C0710 related to the steering position signal intermittently comes and goes?

- It is best to avoid driving the vehicle when the code appears intermittently, as the stability control system may not function properly during those times. It is advisable to address the issue to ensure safe driving conditions.

8. Are there any DIY tips for troubleshooting the OBDII code C0710 in a Buick related to the steering position signal?

- DIY tips may include checking the steering position sensor and steering angle sensor connectors for any loose or damaged connections, inspecting the wiring for signs of wear, and ensuring proper alignment of the sensors.

9. How long does it usually take to repair the OBDII code C0710 in a Buick related to the steering position signal?

- The repair time can vary depending on the specific cause of the issue and the extent of the repairs needed. It may range from a quick sensor replacement to a more involved diagnostic and repair process.

10. Will the OBDII code C0710 in my Buick related to the steering position signal affect the vehicle's overall drivability?

- While the vehicle may still be drivable with this code present, it is important to address the issue promptly to prevent any potential safety hazards or further damage to the stability control system.