B0052 Chevrolet Code - Deployment Commanded
Quick Answer
The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B0052 Chevrolet indicates Deployment Commanded.
- Common causes
- Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B0052 Chevrolet Description
What are the Possible Causes of the DTC B0052 Chevrolet?
- Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
- Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted
- Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection
How to Fix the DTC B0052 Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B0052 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B0052 Chevrolet code?
Need more information on how to fix the B0052 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B0052 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Information for Specific Chevrolet Models
- B0052 2014 Chevrolet Silverado — Deployment Commanded
- B0052 2015 Chevrolet Silverado — Deployment Commanded
- B0052 2016 Chevrolet Silverado — Deployment Commanded
- B0052 2017 Chevrolet Silverado — Deployment Commanded
- B0052 2018 Chevrolet Silverado — Deployment Commanded
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B0052 Chevrolet Code
1. What does OBDII code B0052 Chevrolet Deployment Commanded mean?
- This code indicates an issue with the deployment command for the airbag system in a Chevrolet vehicle.
2. What are the common symptoms of OBDII code B0052?
- Common symptoms include the airbag warning light illuminating on the dashboard and potential non-deployment of the airbags during an accident.
3. What are the possible causes of OBDII code B0052 in a Chevrolet?
- The code may be triggered by a faulty airbag module, damaged wiring, a malfunctioning crash sensor, or issues with the airbag deployment system.
4. How can I diagnose OBDII code B0052 in my Chevrolet?
- Diagnosing this code typically requires a specialized OBDII scanner to retrieve the specific fault codes related to the airbag system.
5. Can I drive my Chevrolet with OBDII code B0052?
- It is not recommended to drive the vehicle with this code present, as it may compromise the effectiveness of the airbag system in the event of a collision.
6. How do I repair OBDII code B0052 in my Chevrolet?
- Repairing this code often involves inspecting and repairing/replacing damaged wiring, resetting the airbag module, or replacing faulty components in the airbag system.
7. Do I need a professional to fix OBDII code B0052 in my Chevrolet?
- Due to the complexity and safety implications of the airbag system, it is advisable to have a qualified technician diagnose and repair this code.
8. Is OBDII code B0052 specific to certain Chevrolet models?
- While this code is commonly found in Chevrolet vehicles, it may also appear in other vehicle makes and models with similar airbag systems.
9. How can I prevent OBDII code B0052 from recurring in my Chevrolet?
- Regular maintenance checks, avoiding impacts to the airbag system, and ensuring proper installation of any aftermarket components can help prevent this code from reoccurring.
10. Will resetting the OBDII code B0052 clear the issue in my Chevrolet?
- Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing the deployment commanded issue.
Discuss the causes and fixes for B0052 Chevrolet OBDII Code
Code B0052 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
