AutoCodes – Chevrolet – B0052 2018 Chevrolet Silverado

B0052 2018 Chevrolet Silverado Code - Deployment Commanded

Quick Answer

The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0052 2018 Chevrolet Silverado indicates Deployment Commanded.
Common causes: Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 414

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0052 2018 Chevrolet Silverado Description

The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. The SDM processes the generated electrical signals and compares them to values stored in memory. When the generated signals exceed the stored values, the SDM performs additional signal processing and compares the generated signals to signals stored in memory. When 2 of the generated signals exceed the stored values, the SDM will cause current to flow through the inflator modules, deploying the inflator modules, and causing DTC B0052 to set.

OBDII Code B0052 2018 Chevrolet Silverado - Deployment Commanded - AutoCodes.com — B0052 2018 Chevrolet Silverado Code - Deployment Commanded

What does this mean?

What are the Possible Causes of the DTC B0052 2018 Chevrolet Silverado?

Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted
Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection

How to Fix the DTC B0052 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0052 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0052 2018 Chevrolet Silverado code?

Need more information on how to fix the B0052 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0052 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0052 2018 Chevrolet Silverado Code

1. What does OBDII code B0052 Deployment Commanded mean for a 2018 Chevrolet Silverado?

This code indicates that the vehicle's airbag system has detected a fault in the deployment command.

2. What are the common symptoms associated with OBDII code B0052 in a 2018 Chevrolet Silverado?

Common symptoms include the airbag warning light being illuminated on the dashboard and potential non-deployment of the airbags in the event of a collision.

3. What are the possible causes of OBDII code B0052 in a 2018 Chevrolet Silverado?

Potential causes include a faulty airbag control module, wiring issues, damaged sensors, or a problem with the airbag deployment circuit.

4. How serious is OBDII code B0052 Deployment Commanded in a 2018 Chevrolet Silverado?

This code is considered serious as it directly affects the functionality of the vehicle's airbag system, which is crucial for occupant safety in the event of a crash.

5. Can OBDII code B0052 be repaired at home, or does it require professional assistance for a 2018 Chevrolet Silverado?

Due to the complexity and safety implications of the airbag system, it is recommended to seek professional assistance to diagnose and repair OBDII code B0052 in a 2018 Chevrolet Silverado.

6. Are there any DIY tips for troubleshooting OBDII code B0052 in a 2018 Chevrolet Silverado?

While basic troubleshooting such as checking for loose connections or damaged wiring can be done, diagnosing and repairing the specific issue related to the airbag system should be left to trained professionals.

7. How much does it typically cost to repair OBDII code B0052 in a 2018 Chevrolet Silverado?

Repair costs can vary depending on the exact cause of the issue, but expect to pay anywhere from a few hundred to over a thousand dollars for parts and labor.

8. Is it safe to continue driving a 2018 Chevrolet Silverado with OBDII code B0052 unresolved?

It is not recommended to drive the vehicle with this code unresolved, as it may compromise the effectiveness of the airbag system in the event of an accident.

9. Can clearing the OBDII code B0052 reset the airbag system in a 2018 Chevrolet Silverado?

Clearing the code may temporarily turn off the warning light, but it will not address the underlying issue causing the fault in the airbag system.

10. How often should the airbag system be inspected in a 2018 Chevrolet Silverado to prevent OBDII code B0052 from occurring?

Regular inspections as part of routine maintenance are recommended to ensure the airbag system is functioning correctly and to catch any potential issues before they trigger OBDII code B0052.