AutoCodes – Chevrolet – B0052 2015 Chevrolet Silverado

B0052 2015 Chevrolet Silverado Code - Deployment Commanded

Quick Answer

The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0052 2015 Chevrolet Silverado indicates Deployment Commanded.
Common causes: Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 324

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0052 2015 Chevrolet Silverado Description

The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. The SDM processes the generated electrical signals and compares them to values stored in memory. When the generated signals exceed the stored values, the SDM performs additional signal processing and compares the generated signals to signals stored in memory. When 2 of the generated signals exceed the stored values, the SDM will cause current to flow through the inflator modules, deploying the inflator modules, and causing DTC B0052 to set.

OBDII Code B0052 2015 Chevrolet Silverado - Deployment Commanded - AutoCodes.com — B0052 2015 Chevrolet Silverado Code - Deployment Commanded

What does this mean?

What are the Possible Causes of the DTC B0052 2015 Chevrolet Silverado?

Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted
Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection

How to Fix the DTC B0052 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0052 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0052 2015 Chevrolet Silverado code?

Need more information on how to fix the B0052 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0052 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0052 2015 Chevrolet Silverado Code

1. What does the OBDII code B0052 on a 2015 Chevrolet Silverado mean?

The code B0052 on a 2015 Chevrolet Silverado indicates that the Deployment Commanded signal has been set by the airbag control module.

2. What are the common symptoms of OBDII code B0052 on a 2015 Chevrolet Silverado?

Common symptoms of code B0052 may include the airbag warning light being illuminated on the dashboard and potential issues with the airbag system deployment.

3. What are the possible causes of OBDII code B0052 on a 2015 Chevrolet Silverado?

Potential causes of code B0052 include a faulty airbag control module, wiring issues in the airbag system, or a problem with the airbag deployment circuit.

4. How can I diagnose OBDII code B0052 on my 2015 Chevrolet Silverado?

Diagnosing code B0052 typically involves using a diagnostic scanner to retrieve the specific fault code, checking the airbag system wiring for any visible damage, and testing the airbag control module for proper functionality.

5. Is it safe to drive my 2015 Chevrolet Silverado with OBDII code B0052?

It is not recommended to drive your vehicle with the airbag warning light on, as it indicates a potential issue with the airbag system's deployment functionality. It is advised to have the issue diagnosed and repaired as soon as possible.

6. Can I reset OBDII code B0052 on my 2015 Chevrolet Silverado?

While you can clear the code temporarily with a diagnostic scanner, it is important to address the underlying issue causing the code to prevent it from reoccurring.

7. How much does it typically cost to repair OBDII code B0052 on a 2015 Chevrolet Silverado?

The cost of repairing code B0052 can vary depending on the specific cause of the issue. It is recommended to consult with a professional mechanic to get an accurate estimate for the repair.

8. Are there any DIY repair tips for fixing OBDII code B0052 on a 2015 Chevrolet Silverado?

DIY repair for code B0052 may include checking and securing any loose wiring connections in the airbag system, but for more complex issues, it is advisable to seek assistance from a qualified technician.

9. Will repairing OBDII code B0052 on my 2015 Chevrolet Silverado affect the vehicle's safety?

Addressing and repairing code B0052 is crucial for maintaining the safety of your vehicle, as it ensures that the airbag system functions properly in the event of a collision.

10. How long does it take to repair OBDII code B0052 on a 2015 Chevrolet Silverado?

The repair time for code B0052 can vary depending on the exact cause of the issue and the complexity of the repair. It is best to consult with a professional technician to get an accurate estimate of the repair duration.