AutoCodes – Chevrolet – B0052 2014 Chevrolet Silverado

B0052 2014 Chevrolet Silverado Code - Deployment Commanded

Quick Answer

The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B0052 2014 Chevrolet Silverado indicates Deployment Commanded.
Common causes: Common causes include Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM), Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted, Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 387

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 17, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B0052 2014 Chevrolet Silverado Description

The Inflatable Restraint Sensing and Diagnostic Module (SDM) contains sensing devices that convert vehicle velocity changes to electrical signals. The SDM processes the generated electrical signals and compares them to values stored in memory. When the generated signals exceed the stored values, the SDM performs additional signal processing and compares the generated signals to signals stored in memory. When 2 of the generated signals exceed the stored values, the SDM will cause current to flow through the inflator modules, deploying the inflator modules, and causing DTC B0052 to set.

OBDII Code B0052 2014 Chevrolet Silverado - Deployment Commanded - AutoCodes.com — B0052 2014 Chevrolet Silverado Code - Deployment Commanded

What does this mean?

What are the Possible Causes of the DTC B0052 2014 Chevrolet Silverado?

Faulty Inflatable Restraint Sensing and Diagnostic Module (SDM)
Inflatable Restraint Sensing and Diagnostic Module harness is open or shorted
Inflatable Restraint Sensing and Diagnostic Module circuit poor electrical connection

How to Fix the DTC B0052 2014 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B0052 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B0052 2014 Chevrolet Silverado code?

Need more information on how to fix the B0052 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B0052 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B0052 2014 Chevrolet Silverado Code

1. What does OBDII code B0052 in a 2014 Chevrolet Silverado mean?

The B0052 code indicates that the Deployment Commanded signal from the airbag control module is not present.

2. What are the common symptoms of OBDII code B0052 in a 2014 Chevrolet Silverado?

Common symptoms may include the airbag warning light illuminating on the dashboard and potential non-deployment of the airbags during a crash.

3. What are the possible causes of OBDII code B0052 in a 2014 Chevrolet Silverado?

Possible causes of the B0052 code include a faulty airbag control module, damaged wiring or connectors in the airbag system, or a malfunctioning clockspring.

4. How can I diagnose OBDII code B0052 in my 2014 Chevrolet Silverado?

Diagnosing the B0052 code typically involves using a diagnostic scanner to retrieve the code, inspecting the airbag system components for damage, and testing the airbag control module and related circuits.

5. Is it safe to drive with OBDII code B0052 present in a 2014 Chevrolet Silverado?

It is not recommended to drive with the B0052 code active, as it indicates a potential issue with the airbag system, which is a critical safety feature in the vehicle.

6. Can I reset OBDII code B0052 in my 2014 Chevrolet Silverado on my own?

Resetting the B0052 code may temporarily turn off the warning light, but it will likely reappear if the underlying issue is not addressed. It's best to diagnose and repair the root cause of the code.

7. How much does it typically cost to repair OBDII code B0052 in a 2014 Chevrolet Silverado?

The cost of repairing the B0052 code can vary depending on the specific cause of the issue. It may involve replacing the airbag control module, repairing wiring, or fixing other components in the airbag system.

8. Can a DIY enthusiast fix OBDII code B0052 in a 2014 Chevrolet Silverado?

While some basic diagnostics and inspections can be done by a DIY enthusiast, repairing the B0052 code often requires specialized knowledge and tools, so it's recommended to seek professional help.

9. Will OBDII code B0052 cause my 2014 Chevrolet Silverado to fail an emissions test?

The B0052 code is related to the airbag system and does not impact emissions, so it should not cause your vehicle to fail an emissions test.

10. How long does it take to repair OBDII code B0052 in a 2014 Chevrolet Silverado?

The repair time for the B0052 code can vary based on the exact cause of the issue and the availability of parts. It's best to consult with a mechanic for a more accurate estimate.