AutoCodes – Chevrolet – B001E Chevrolet

B001E Chevrolet Code - Driver Seat Inboard Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B001E Chevrolet indicates Driver Seat Inboard Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,990

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B001E Chevrolet Description

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. There are 2 shorting bars used within the connector that will short the control circuits together when the connector is disconnected. This will help to prevent unwanted deployment of the air bag during servicing.

OBDII Code B001E Chevrolet - Driver Seat Inboard Side Air Bag Deployment Loop - AutoCodes.com — B001E Chevrolet Code - Driver Seat Inboard Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B001E Chevrolet?

Faulty Driver Seat Inboard Side Air Bag
Driver Seat Inboard Side Air Bag harness is open or shorted
Driver Seat Inboard Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B001E Chevrolet?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B001E:01 Driver Seat Inboard Side Air Bag Deployment Loop Short to Battery
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B001E Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B001E Chevrolet code?

Need more information on how to fix the B001E Chevrolet code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001E Chevrolet code diagnosed by a professional: Find a repair shop in your area

Information for Specific Chevrolet Models

B001E 2014 Chevrolet Silverado — Driver Seat Inboard Side Air Bag Deployment Loop
B001E 2015 Chevrolet Silverado — Driver Seat Inboard Side Air Bag Deployment Loop
B001E 2016 Chevrolet Silverado — Driver Seat Inboard Side Air Bag Deployment Loop
B001E 2017 Chevrolet Silverado — Driver Seat Inboard Side Air Bag Deployment Loop
B001E 2018 Chevrolet Silverado — Driver Seat Inboard Side Air Bag Deployment Loop

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001E Chevrolet Code

1. What does OBDII code B001E for Chevrolet indicate?

The B001E code specifically refers to an issue with the driver seat inboard side airbag deployment loop in a Chevrolet vehicle.

2. What are common symptoms of OBDII code B001E in a Chevrolet?

Common symptoms include the illumination of the airbag warning light on the dashboard, as well as a potential message indicating a fault with the driver seat airbag system.

3. What are possible causes of OBDII code B001E in a Chevrolet?

Potential causes may include a faulty driver seat inboard side airbag module, damaged wiring or connectors in the airbag system, or a problem with the airbag control module.

4. How can I diagnose OBDII code B001E in my Chevrolet?

Diagnosis typically involves using a compatible OBDII scanner to retrieve the specific fault code, followed by a detailed inspection of the driver seat inboard side airbag system components for any visible damage or issues.

5. Can I continue driving my Chevrolet with OBDII code B001E?

It is not recommended to drive the vehicle with an active airbag fault code, as it may indicate a potential safety risk in the event of a collision. Prompt attention and repair are advised.

6. How can I repair OBDII code B001E in my Chevrolet?

Repairing the B001E code may involve replacing the driver seat inboard side airbag module, repairing or replacing damaged wiring or connectors, and resetting the airbag system using a diagnostic tool.

7. Is it safe to reset the airbag system after repairing OBDII code B001E in my Chevrolet?

It is safe to reset the airbag system after making the necessary repairs for the B001E code. However, it is crucial to ensure that all components are properly installed and functioning correctly to maintain safety.

8. Can I clear the OBDII code B001E in my Chevrolet without fixing the issue?

Clearing the fault code without addressing the underlying problem is not recommended, as the issue may persist and pose a safety hazard. It is best to diagnose and repair the cause of the B001E code.

9. Are there any recalls or service bulletins related to OBDII code B001E in Chevrolet vehicles?

It is advisable to check with a Chevrolet dealership or visit the manufacturer's website to inquire about any relevant recalls or service bulletins related to the B001E fault code for specific models.

10. How can I prevent OBDII code B001E from occurring in my Chevrolet?

Regular maintenance, careful handling of airbag components, and prompt attention to any warning lights related to the airbag system can help prevent issues like the B001E code from occurring in Chevrolet vehicles.