AutoCodes – Chevrolet – B001E 2015 Chevrolet Silverado

B001E 2015 Chevrolet Silverado Code - Driver Seat Inboard Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B001E 2015 Chevrolet Silverado indicates Driver Seat Inboard Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 516

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B001E 2015 Chevrolet Silverado Description

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. There are 2 shorting bars used within the connector that will short the control circuits together when the connector is disconnected. This will help to prevent unwanted deployment of the air bag during servicing.

OBDII Code B001E 2015 Chevrolet Silverado - Driver Seat Inboard Side Air Bag Deployment Loop - AutoCodes.com — B001E 2015 Chevrolet Silverado Code - Driver Seat Inboard Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B001E 2015 Chevrolet Silverado?

Faulty Driver Seat Inboard Side Air Bag
Driver Seat Inboard Side Air Bag harness is open or shorted
Driver Seat Inboard Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B001E 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B001E:01 Driver Seat Inboard Side Air Bag Deployment Loop Short to Battery
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B001E 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B001E 2015 Chevrolet Silverado code?

Need more information on how to fix the B001E 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001E 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001E 2015 Chevrolet Silverado Code

1. What does OBDII code B001E for a 2015 Chevrolet Silverado indicate?

The code B001E on a 2015 Chevrolet Silverado relates to the Driver Seat Inboard Side Air Bag Deployment Loop.

2. What are some common symptoms of OBDII code B001E in a 2015 Chevrolet Silverado?

Common symptoms of code B001E may include the airbag warning light illuminating on the dashboard and a message indicating an issue with the driver seat inboard side airbag system.

3. What are possible causes of OBDII code B001E in a 2015 Chevrolet Silverado?

Potential causes of code B001E can include a faulty driver seat inboard side airbag deployment loop, wiring issues, or a malfunctioning airbag control module.

4. How can I diagnose the OBDII code B001E in my 2015 Chevrolet Silverado?

Diagnosing code B001E typically involves using a professional OBDII scanner to read the specific error code, checking the wiring connections related to the driver seat inboard side airbag, and inspecting the airbag control module.

5. Can I continue driving my 2015 Chevrolet Silverado with OBDII code B001E?

It is not recommended to drive your vehicle with an active airbag system fault code like B001E, as it may compromise the safety features designed to protect occupants in case of an accident.

6. How can I reset the OBDII code B001E in my 2015 Chevrolet Silverado?

Resetting the B001E code usually involves fixing the underlying issue triggering the fault code, such as repairing or replacing the driver seat inboard side airbag deployment loop, then using an OBDII scanner to clear the code.

7. Is it safe to repair OBDII code B001E on my 2015 Chevrolet Silverado myself?

Due to the critical safety nature of airbag systems, it is recommended to have a qualified mechanic or technician diagnose and repair OBDII code B001E to ensure proper functioning of the airbag system.

8. Are there any recalls related to OBDII code B001E for a 2015 Chevrolet Silverado?

It's advisable to check with Chevrolet or the National Highway Traffic Safety Administration (NHTSA) for any recalls or service bulletins related to OBDII code B001E affecting the 2015 Silverado model.

9. How much does it typically cost to repair OBDII code B001E in a 2015 Chevrolet Silverado?

The cost of repairing code B001E can vary depending on the specific cause of the issue, parts needed for replacement, labor costs, and whether the repair is done at a dealership or an independent repair shop.

10. Can OBDII code B001E in a 2015 Chevrolet Silverado affect the vehicle's overall safety?

Yes, OBDII code B001E, related to the driver seat inboard side airbag deployment loop, can impact the effectiveness of the airbag system in the event of a collision, potentially compromising the safety of occupants in the vehicle.