AutoCodes – Chevrolet – B001E 2018 Chevrolet Silverado

B001E 2018 Chevrolet Silverado Code - Driver Seat Inboard Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B001E 2018 Chevrolet Silverado indicates Driver Seat Inboard Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 430

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B001E 2018 Chevrolet Silverado Description

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. There are 2 shorting bars used within the connector that will short the control circuits together when the connector is disconnected. This will help to prevent unwanted deployment of the air bag during servicing.

OBDII Code B001E 2018 Chevrolet Silverado - Driver Seat Inboard Side Air Bag Deployment Loop - AutoCodes.com — B001E 2018 Chevrolet Silverado Code - Driver Seat Inboard Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B001E 2018 Chevrolet Silverado?

Faulty Driver Seat Inboard Side Air Bag
Driver Seat Inboard Side Air Bag harness is open or shorted
Driver Seat Inboard Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B001E 2018 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B001E:01 Driver Seat Inboard Side Air Bag Deployment Loop Short to Battery
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B001E 2018 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B001E 2018 Chevrolet Silverado code?

Need more information on how to fix the B001E 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001E 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001E 2018 Chevrolet Silverado Code

1. What does OBDII code B001E mean for a 2018 Chevrolet Silverado?

- OBDII code B001E indicates a problem with the driver seat inboard side airbag deployment loop in a 2018 Chevrolet Silverado.

2. What are the common symptoms of OBDII code B001E in a 2018 Chevrolet Silverado?

- Common symptoms of code B001E may include the airbag warning light illuminating on the dashboard and a potential loss of functionality in the driver seat inboard side airbag.

3. What are possible causes of OBDII code B001E in a 2018 Chevrolet Silverado?

- Causes of code B001E can include damaged wiring in the driver seat inboard side airbag system, faulty airbag sensors, or a malfunctioning airbag control module.

4. How can I diagnose OBDII code B001E in my 2018 Chevrolet Silverado?

- Diagnosing code B001E typically involves using a diagnostic scanner to retrieve the specific fault code, inspecting the airbag system wiring for damage, and testing the airbag sensors and control module for proper functionality.

5. Is it safe to drive a 2018 Chevrolet Silverado with OBDII code B001E present?

- It is not recommended to drive the vehicle with an active B001E fault code, as it indicates a potential issue with the driver seat inboard side airbag system, which is a critical safety component.

6. How can I repair OBDII code B001E in a 2018 Chevrolet Silverado?

- Repairing code B001E may involve repairing or replacing damaged wiring, replacing faulty airbag sensors or the airbag control module, and clearing the fault code with a diagnostic scanner.

7. Can I reset OBDII code B001E in a 2018 Chevrolet Silverado myself?

- While you can clear the fault code with a diagnostic scanner, it is important to address the underlying issue causing the code to prevent future safety risks.

8. Are there any recalls or technical service bulletins related to OBDII code B001E in a 2018 Chevrolet Silverado?

- It is recommended to check with a Chevrolet dealership or the National Highway Traffic Safety Administration (NHTSA) for any recalls or technical service bulletins related to code B001E in a 2018 Silverado.

9. How much does it typically cost to repair OBDII code B001E in a 2018 Chevrolet Silverado?

- The cost of repairing code B001E can vary depending on the specific issue causing the fault code and the labor rates of the repair facility. It is advisable to obtain quotes from different mechanics or dealerships.

10. Can OBDII code B001E in a 2018 Chevrolet Silverado affect the vehicle's overall safety in a crash?

- Yes, code B001E specifically relates to the driver seat inboard side airbag system, which plays a crucial role in protecting occupants during a side-impact collision. It is important to address this code promptly to ensure the airbag system functions as intended in an emergency.