AutoCodes – Chevrolet – B001E 2017 Chevrolet Silverado

B001E 2017 Chevrolet Silverado Code - Driver Seat Inboard Side Air Bag Deployment Loop

Quick Answer

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B001E 2017 Chevrolet Silverado indicates Driver Seat Inboard Side Air Bag Deployment Loop.
Common causes: Common causes include Faulty Driver Seat Inboard Side Air Bag, Driver Seat Inboard Side Air Bag harness is open or shorted, Driver Seat Inboard Side Air Bag circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 535

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Oct 05, 2022

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B001E 2017 Chevrolet Silverado Description

During a side or frontal crash of sufficient force, the Inflatable Restraint Sensing and Diagnostic Module (SDM) will allow current to flow through the deployment loop in order to deploy an air bag. There are 2 shorting bars used within the connector that will short the control circuits together when the connector is disconnected. This will help to prevent unwanted deployment of the air bag during servicing.

OBDII Code B001E 2017 Chevrolet Silverado - Driver Seat Inboard Side Air Bag Deployment Loop - AutoCodes.com — B001E 2017 Chevrolet Silverado Code - Driver Seat Inboard Side Air Bag Deployment Loop

What does this mean?

What are the Possible Causes of the DTC B001E 2017 Chevrolet Silverado?

Faulty Driver Seat Inboard Side Air Bag
Driver Seat Inboard Side Air Bag harness is open or shorted
Driver Seat Inboard Side Air Bag circuit poor electrical connection
Faulty Sensing and Diagnostic Module (SDM)

How to Fix the DTC B001E 2017 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B001E:01 Driver Seat Inboard Side Air Bag Deployment Loop Short to Battery
B001E:02 Driver Seat Inboard Side Air Bag Deployment Loop Short to Ground
B001E:04 Driver Seat Inboard Side Air Bag Deployment Loop Open
B001E:0D Driver Seat Inboard Side Air Bag Deployment Loop High Resistance
B001E:0E Driver Seat Inboard Side Air Bag Deployment Loop Low Resistance

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B001E 2017 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B001E 2017 Chevrolet Silverado code?

Need more information on how to fix the B001E 2017 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B001E 2017 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B001E 2017 Chevrolet Silverado Code

1. What does the OBDII code B001E for the 2017 Chevrolet Silverado indicate?

The code B001E specifically refers to the Driver Seat Inboard Side Air Bag Deployment Loop circuit.

2. What are the common symptoms associated with OBDII code B001E in a 2017 Chevrolet Silverado?

Common symptoms of this code may include an illuminated airbag warning light on the dashboard and a message indicating an issue with the driver seat airbag system.

3. What are some possible causes of the B001E code in a 2017 Chevrolet Silverado?

Potential causes of the B001E code can include a faulty driver seat inboard side airbag deployment loop, damaged wiring or connectors in the airbag system, or a malfunctioning airbag control module.

4. How can I diagnose the OBDII code B001E in my 2017 Chevrolet Silverado?

Diagnosing the B001E code typically involves using a professional OBDII scanner to retrieve the specific fault code, followed by inspecting the driver seat airbag system components for any visible damage or issues.

5. Is it safe to drive my 2017 Chevrolet Silverado with the B001E code present?

It is not recommended to drive the vehicle with the B001E code active, as it indicates a potential issue with the driver seat airbag system, which could compromise occupant safety in the event of a collision.

6. Can I repair the B001E code in my 2017 Chevrolet Silverado myself?

While some basic inspections and checks can be done by DIY enthusiasts, repairing the B001E code often requires specialized tools and expertise to properly diagnose and fix the underlying issue with the driver seat airbag deployment loop.

7. How much does it typically cost to repair the B001E code in a 2017 Chevrolet Silverado?

The cost of repairing the B001E code can vary depending on the exact cause of the issue, but it may involve replacing components like the driver seat inboard side airbag deployment loop, repairing damaged wiring, or reprogramming the airbag control module.

8. Are there any recalls or service bulletins related to the B001E code in the 2017 Chevrolet Silverado?

It's advisable to check with a Chevrolet dealership or the manufacturer's website to see if there are any recalls or service bulletins addressing the B001E code specifically for the 2017 Silverado model.

9. How can I prevent the recurrence of the B001E code in my 2017 Chevrolet Silverado?

Regular maintenance checks, avoiding physical damage to the airbag system components, and addressing any warning lights promptly can help prevent the reoccurrence of the B001E code in your Silverado.

10. Can the B001E code in a 2017 Chevrolet Silverado be related to other airbag issues in the vehicle?

While the B001E code specifically relates to the driver seat inboard side airbag deployment loop, it's essential to have a comprehensive inspection of the entire airbag system to ensure there are no other underlying issues affecting overall safety.